Manuals / Sharp / Computer Equipment / Projector

Sharp XV-Z3000 manual Image Projection, Switching the Input Mode, Info, OperationBasic

Models: XV-Z3000

1 67

Download 67 pages 8.05 Kb

Page 31

Turning the Power off (Putting the Projector into Standby Mode)

STANDBY button

Turning the Power off (Putting the Projector into Standby Mode)

Press SSTANDBY/ON on the pro-

1 jector or aSTANDBY on the re- mote control, then press that but- ton again while the confirmation message is displayed, to put the projector into standby mode.

	On-screen Display (confirmation message)
2	Unplug the power cord from the AC
2	outlet after the cooling fan stops.

•The power indicator on the projector blinks in green while cooling.

•The power indicator changes to red when the projector finishes cooling.

Info

R

•Do not unplug the power cord during projection or cooling fan operation. This can cause dam- age due to rise in internal temperature, as the cooling fan also stops.

Image Projection

INPUT buttons

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press the appropriate INPUT button on the remote control to select the desired input mode.

• When pressing INPUT (P/R) on the projector, input mode switches in the following order:

INPUT1 INPUT2 INPUT3

INPUT6 INPUT5 INPUT4

OperationBasic

29

Image 31

Sharp XV-Z3000 Image Projection, Switching the Input Mode, Turning the Power off Putting the Projector into Standby Mode

Contents

ENGLISH DEUTSCH FRANÇAIS SVENSKA ESPAÑOL ITALIANO NEDERLANDS XV-Z3000DANGER SPECIAL NOTE FOR USERS IN THE U.KSee bottom of projector IntroductionModel No. XV-Z3000 Serial No ENGLISHPRODUCT DISPOSAL Caution Concerning Lamp ReplacementTroubleshooting How to Read this Operation ManualFor Future Reference MaintenanceUseful Features ContentsUsing SetupAppendix ReferenceIntroduction 8. Accessories IMPORTANT SAFEGUARDS5. Cleaning 11. Power SourcesIntroduction 18. Damage Requiring Service19. Replacement Parts 20. Safety CheckWarning about placing the projector in a high position Observe the following safeguards when setting up your projectorCaution concerning the setup of the pro- jector Caution concerning the lamp unitIntroduction Using the projector in other countriesTemperature monitor function InfoSupplied accessories AccessoriesOptional accessories Top View Part Names and FunctionsProjector IntroductionRear View Part Names and Functions ContinuedTerminals Introduction Using the Kensington Lock on the projectorFor selecting menu items 3 Attach the cover and slide it until it clicks into place Part Names and Functions ContinuedInserting the Batteries 2 Insert the batteriesIntroduction Usable Range3. Remove the lens cap and turn the projector on P Quick StartSetup and Projection 1. Place the projector facing a wall or a screen4. Turn the video equipment on and start playback 6. Adjust the focus, image size, and projector angle PP. 308. Turn the Power off 7. Correct trapezoidal distortion GEOMETRIC ADJUSTMENT PPCeiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionProjection PRJ Mode SetupIndication of the Projection Image Size and Projection Distance Picture Screen Size and Projection Distance Setting up the Projector ContinuedWhen using a wide screen 169 and projecting 169 image When using a normal screen 43 and projecting 43 image SIDE BAR ModeFeet/inches SetupWhen using a normal screen 43 and projecting 169 image Allow a margin of error in the values in the diagramsSamples of Cables for Connection Connections Connecting to Video Equipmentaccessory Connecting to Video Equipment ContinuedWhen connecting to equipment with S-video output terminal INPUT3 When connecting to equipment with video output terminal INPUT43 RCA to 15-pin D-sub cable optional accessory AN-C3CP2 When connecting to equipment with HDMI output teminal INPUT6Connections accessory Connecting to a ComputerInfo Controlling the Projector by a ComputerConnections Info Turning the Projector On/OffConnecting the Power Cord Turning the Projector onUnplug the power cord from the AC Image ProjectionSwitching the Input Mode Turning the Power off Putting the Projector into Standby Mode3 Adjusting the Height Adjusting the Projected Image1 Adjusting the Focus 2 Adjusting the Screen SizeOperationBasic 3 Use the rear adjustment foot to make the projector levelRear adjustment foot InfoCorrecting Trapezoidal Distortion Image Projection ContinuedThere are the two types of the Keystone Correction Each time cKEYSTONE is pressed, the display toggles as follows “GEOMETRIC ADJUSTMENT” will be displayedSelecting the Type of Correction OperationBasic4 Press i ENTER to set the posi- tion GEOMETRIC ADJUSTMENTImage Projection Continued InfoPress cKEYSTONE or iENTER on the remote control and theH & V KEYSTONE OperationBasicVIDEO Press m RESIZE on the projector or jRESIZE on the remote controlImage Projection Continued Resize ModeAbout Copyrights OperationBasicComputer Freezing a Moving Image Operating with the Remote ControlSwitching the Iris Setting Shifting the Projected Im- age Vertically Image Shift“C.M.S.” Menu ItemsThe following shows the items that can be set in the projector “Picture” menu“Options2” menu Menu Items Continued“Fine Sync” menu “Options1” menu1 Press dMENU Using the Menu ScreenMenu Selections Adjustments 2 Press Q or O to select the menu icon to adjustPress O or Q to adjust the item selected Using the Menu Screen ContinuedTo adjust the projected image while watching it 3 Press P or R to select the item to adjust2Adjusting the Image Picture Adjustment “Picture” menu1Selecting the Picture Mode 5 Progressive Picture Adjustment “Picture” menu Continued3Adjusting the Color Temperature 4Adjusting the Colors6Reducing Image Noise 7Switching the IrisSetting 8Lamp Setting3Auto Sync Auto Sync Adjustment Computer Image Adjustment “Fine Sync” menu1Adjusting the Computer Image 2Special Modes Setting3 Adjusting the Vertical Size of the Display Subtitle Setting Using the “Options” Menu2Adjusting the Overscan 1Adjusting the Image Position6Signal Type Setting Using the “Options” Menu Continued4Setting On-screen Display 5Setting the Video System0Checking the Lamp Life Status 9Auto Power OffSettings on the Options 2 menu Function5Returning to the Default Settings Using the “Options” Menu Continued4Fan Mode Setting 3Reducing the Power Consumption When the Power Is in Standby ModeInfo MaintenanceAppendix Top View Maintenance IndicatorsAbout the temperature warning indicator About the lamp indicatorInfo If the temperature warning indicator illuminates, and the projector enters standby mode, follow the possible solutions above and then wait until the projector has cooled down completely before plug- ging in the power cord and turning the power back on. At least 10 minutesAppendix Replacing the Lamp Regarding the LampLamp Caution Concerning the LampAppendix Removing and Installing the Lamp Unit2 Disconnect the power cord InfoRegarding the Lamp Continued Resetting the Lamp Timer1 Connect the power cord 2 Reset the lamp timerComputer Connecting Pin AssignmentsAppendix ProjectorSignal format Conforms to RS-232C standard RS-232C Specifications and Command SettingsCommands Connecting Pin Assignments ContinuedComputer Computer Compatibility ChartColor is faded or poor Troubleshooting23-27 23-27INPUT 6 is selected Appendix23-27 The black levels of theSpecifications Units inches mm Dimensions11, 12 IndexStandard connector Temperature warning indicator