14
Setup & Connections
1
2 To S-video output terminal
2 To video output terminal
1

Projector

VCR,
Laser disc player,
DVD player or
DTV decoder
Connecting to Video Equipment
*
*
2To component output
terminals
1
Component cable
(commercially available)
DVD player
or
DTV decoder
1Connect each RCA connector of a component cable to the corresponding
RCA INPUT 1 or 2 terminals on the projector.
2Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
When connecting this projector to a DVD player or DTV decoder, select
“Component” for “Signal Type” on the GUI menu. (See page 31.)

CAUTION

•Make sure to turn both the projector and the video equipment off, before
connecting.
S-video cable (commercially available)
Video cable

Projector

* The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this
projector. Please refer to the operation manual of the DTV decoder for details.
Connecting a video source (DVD player or DTV decoder) using the RCA INPUT 1 or 2 terminals

Connecting to a DTV decoder with analog RGB output

1Connect each RCA connector to the corresponding RCA INPUT 1 or 2 terminals on the projector.
2Connect the other end of cable to the corresponding terminals on a DTV decoder.
When connecting this projector to analog RGB output of the DTV decoder, select “RGB” for “Signal Type” on the GUI
menu. (See page 31).
2To analog RGB
output terminals DTV decoder
Projector
1D-sub/5BNC cable
(Commercially available)
Five RCA-BNC adaptors (Commercially available)
CAUTION
•Make sure to turn both the projector and the video equipment off,
before connecting.