Setup Connections&
Keystone Correction
| This function can be used to adjust the Keystone | |
| settings. |
|
| • For detaiils about using the menu screen, see page 26. | |
| Description of 2D Keystone Correction | |
| Selected item | Description |
| H Keystone | Horizontally adjusts the keystone settings. |
| V Keystone | Vertically adjusts the keystone settings. |
| Reset | V and H Keystone adjustments are returned to the factory |
1, 5 |
| preset settings. |
|
| |
2, 3 | Horizontal Keystone Correction | |
4
Vertical Keystone Correction
1Press KEYSTONE on the projector or on the remote control.
2Press 
/ 
to select “H Keystone” or “V Keystone”.
3Press 
/
to move the 
mark on the selected adjustment item to the desired setting.
4The test pattern is displayed when ENTER is pressed. This test pattern can then be used to make fine adjustments in the same manner as described in the step 3.
5To return to the normal screen, press KEYSTONE again.
•You can display the blue screen by pressing ENTER when adjusting the Keystone setting.
•Straight lines and the edges of the displayed image may appear jagged, when adjusting the Keystone setting.
•When adjusting “H Keystone” and “V Keystone” at the same time, the values of adjustable angles for each setting become smaller.
•The adjustment range may be limited depending on the Digital Shift and Subtitle adjustment values.