Specifications
Product type | Projector |
Model | |
Video system | PAL/PAL |
Display method | DTV 480i/480P/720P/1080i |
DLP chip, RGB optical shutter method | |
DLP panel | Panel size: 0.55” |
| Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments |
| Drive method: Digital Light Processing (DLP™) |
Lens | No. of dots: 480,000 dots (800 [H] 2 600 [V]) |
Projection lamp | 150 W SHP lamp |
Video input signal | RCA Connector: VIDEO (INPUT 4), composite video, 1.0 |
terminated | |
| Y (luminance signal): 1.0 |
C(chrominance signal): Burst 0.286
Component input signal RCA Connector
(INPUT 1) Y: 1.0
| PB: 0.7 |
| PR: 0.7 |
Component input signal | |
(INPUT 2) | DVI input signal: Digital |
| Analog 0.7 |
| Y: 1.0 |
| PB: 0.7 |
| PR: 0.7 |
Component RGB input signal | |
(INPUT 2) | RGB separate/sync on green type analog input: |
| HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) |
| VERTICAL SYNC. SIGNAL: Same as above |
Horizontal resolution | 520 TV lines (NTSC 3.58 input) |
RGB input signal | |
| RGB separate/composite sync/sync on green type analog input: |
| 75 Ω terminated |
| HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only) |
| VERTICAL SYNC. SIGNAL: Same as above |
Pixel clock | |
Vertical frequency | |
Horizontal frequency | |
Computer control signal | |
Rated voltage | AC |
Input current | 3.6 A |
Rated frequency | 50/60 Hz |
Power consumption | 200 W |
Heat dissipation | 1,400 BTU/hour |
Operating temperature | 41°F to 95°F (`5°C to `35°C) |
Storage temperature | 14°F to 140°F (120°C to `60°C) |
Cabinet | Plastic |
I/R carrier frequency | 38 kHz |
Dimensions (approx.) | 141⁄29 (W) 2 69⁄169 (H) 2 127⁄89 (D) (368 2 153.8 2 327 mm) (including swivel stand) |
| 141⁄29 (W) 2 45⁄89 (H) 2 127⁄89 (D) (368 2 118 2 327 mm) (main body only) |
Weight (approx.) | 9.5 lbs. (4.3 kg) (including swivel stand) |
| 8.4 lbs. (3.8kg) (main body only) |
Supplied accessories | Remote control, Two AA size batteries, Power cord (118 109, 3.6 m), Terminal cover, Lens |
| cap (attached on the body), Lens cap strap, Operation manual, Screws for terminal cover |
Replacement parts | Lamp unit (Lamp/cage module) |
| AA size batteries, Power cord (QACCDA007WJPZ), Terminal cover (GCOVAA116WJKA), |
| Lens cap (CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manual |
|
This SHARP projector uses a DMD chip. This very sophisticated chip | This unit has some inactive pixels within acceptable tolerances which | ||
contains 480,000 pixels. As with any high technology electronic | may result in inactive dots on the picture screen. This will not affect | ||
equipment such as large screen TVs, video systems and video | the picture quality or the life expectancy of the unit. If you have any | ||
cameras, there are certain acceptable tolerances that the equipment | questions about this matter, please call toll free | ||
must conform to. | U.S.A. ONLY |
|
Specifications are subject to change without notice.
Appendix