AX5103(G)2007.8.174:43PM페이지 7
DIGI LINK III System Remote Controls
•You can remotely control not only this amplifier but also Sherwood compatible components bearing the DIGI LINK II or III logo.
•For system remote control operation, first make the DIGI LINK connections.
ENGLISH
SPEAKER SELECTOR A, B
BUTTONS
POWER BUTTON
In the standby mode, press this button
to enter the operating or the standby mode.
NUMERIC BUTTONS
For selecting preset stations in tuner mode. For selecting a track in CD mode.
SLEEP BUTTON
When the Sherwood components (including tuner such as
DIGI LINK III connections, the sleep timer of Sherwood tuner allows the system to continue operating for a specified period of time before automatically shutting off.
Each time this button is pressed, the sleep time on Sherwood tuner changes as follows;
When the sleep time is selected, all display panels of the system are dimly lit.
TAPE DECK SECTION
DECK SELECTOR A, B - for selecting deck A or B
, 
- to begin reverse or forward side playback.
- to stop playback or recording.
INPUT SELECTOR BUTTONS
PRESET SCAN BUTTON
For scanning preset stations in sequence in tuner mode.
MUTE BUTTON
Press this button to temporarily mute the sound.
Press again to resume the previous sound level.
DIMMER BUTTON
Each time this button is pressed,
the brightness of all fluorescent displays of Sherwood components connected by the DIGI LINK III changes together
as follows;
VOLUME UP/DOWN
CD PLAYER SECTION
- to pause play.
- to stop play or to clear a program.
- to begin play.
•In the DIGI LINK III remote control system, if pressing PLAY, etc. on CD player or tape deck, CD or TAPE 2 MONITOR is selected automatically without selecting the input source and then PLAY, etc. starts.
Notes :
•Some functions for CD player or tape deck may not be available.
•For details about functions, refer to the operating instructions of each component.
8
