ENGLISH
Troubleshooting Guide
If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.
PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
No power | • The AC input cord is disconnected. | • Connect the cord securely. |
| • The POWER switch is not pressed | • Press the POWER button to ON. |
| correctly. |
|
|
|
|
No play | • The disc is loaded upside down. | • Reload the disc with the printed side |
|
| up. |
| • Dirty disc. | • Clean the disc. |
| • Defective or deeply scratched disc. | • Load another disc. |
|
|
|
No sound | • Incorrect connections. | • Make connections correctly. |
| • Incorrect operation of the amplifier. | • Operate the amplifier correctly. |
| • The " " indicator lights up. | • Press the PLAY or PAUSE button to |
|
| cancel the pause mode. |
|
|
|
Poor or distorted sound | • The unit is connected to the PHONO | • Make connections correctly. |
| input jacks of the amplifier. |
|
| • Poor connections. | • Check the connections and connect |
|
| all cords securely. |
|
|
|
Sound skips | • Defective or deeply scratched disc. | • Play another disc. |
| • This unit is placed on a surface that is | • Place this unit on a stable surface. |
| subject to vibration or physical shock. |
|
|
|
|
Programming or deleting | • The disc is dirty or badly scratched. | • Try again with a |
does not perform. | • The programming or deleting | • Try again. |
| procedure is not correct. |
|
| • The number of the programmed | • Check the number of the |
| selections is 32. | programmed selections. |
|
|
|
“Error” is displayed. | • Incorrect operation. | • Press the OPEN/CLOSE button to |
|
| open and close the disc tray or press |
|
| the POWER switch to turn the power |
|
| off and on. |
|
|
|
2 4
