Sherwood DS-801 manual Poweron/Standby Button, English

POWER(ON/STANDBY) BUTTON

•Press this button to turn the power on and press again to enter the standby mode.

•In standby mode, this unit is not disconnected from the AC mains and a small amount of current is retained for operation readiness.

•For system operation, connect this unit to Sherwood system receiver RX-801R as illustrated in the connecting diagram in the operating instructions of RX-801R, then this unit is turned on or off depending on the power operation on RX-801R.

TAPE TRAY

Load a tape with its exposed tape backwards.

OPEN/CLOSE() BUTTON

Press this button to open or close the tape tray.

REVERSE PLAY() BUTTON

Press this button to play back the back side of the tape.

FORWARD PLAY( ) BUTTON

Press this button to play back the front side of the tape.

STOP() BUTTON

Press this button to stop the tape.

FLUORESCENT DISPLAY

A

REWIND() BUTTON

Press this button to rewind the tape rapidly during forward playback or to advance during reverse playback.

FAST FORWARD( ) BUTTON

Press this button to advance the tape rapidly during forward playback or to rewind during reverse playback.

RECORD/RECORD MUTE( ) BUTTON

Press this button to record or to make a 4 second blank space between the programs for automatic music search, etc.

DOLBY NR BUTTON

Press this button to select the Dolby B NR system when playing back or recording.

COUNTER RESET BUTTON

Press this button to reset the counter to “0000”.

CD SYNCHRO RECORDING BUTTON

Press this button to use the CD SYNCHRO RECORDING function.

REVERSE MODE BUTTON

Press this button to select the desired reverse mode.

D

ENGLISH

BCE F G H

TAPE COUNTER DISPLAY	RECORD INDICATOR
TAPE DETECTION INDICATOR	TAPE DIRECTION DISPLAY
DOLBY B NR INDICATOR	REVERSE MODE DISPLAY
LEVEL METER DISPLAY	CD SYNCHRO RECORDING INDICATOR

WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R

This unit can be remotely controlled with Sherwood system receiver RX-801R.

•To listen to a tape by using the system remote control unit of RX-801R, first connect SYSTEM CONNECTOR jack of this unit to that of Sherwood system receiver RX-801R.

•With the system remote control unit of RX-801R, you can use additional functions.

7