BEFORE USE
※Check following parts included in the package with the main unit:
1)Turntable platter
2)Slip mat
3)Dust cover
4)
5)Counterweight
6)Headshell
7)Operating instructions
*Notes:
1)Do not connect the AC power plug before assembly has been completed.
2)Before turn on the power, check that the voltage settings is correct.
3)Read this manual carefully before using the unit and be sure to store the manual in a safe place for future reference.
PLACEMENT
Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance.
Do not place the unit in a location where there is high humidity or a lot of dust.
Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor or through the air resulting in howling. Find a location which is very stable and vibration free. The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.
MAINTENANCE
Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
When the sound becomes distorted or noisy, check the stylus. If worn out, replace it with a new one.
From time to time,the dust cover and turntable cabinet should be wiped with a soft,dry cloth. Any volatile materials such as alcohol, thinner, benzine, ect., may remove the paint or damage the lustre and should not be used.
CONNECTIONS
1.Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier or receiver or to a household AC outlet.
2.Connect the unit output terminals to the PHONO jack of your amplifier or receiver.
Output terminals | Amplifier(Receiver) |
L (White) | L Channel |
R (Red) | R Channel |
GND (Spade) | GND |
NOTE:
Be sure to connect the ground terminal firmly to the amplifier or receiver.
If this connection is not made or is loose, a power source“HUM”will result.
SPECIFICATIONS
※ General |
|
|
.……….……… | AC 230V~ 50/60Hz | |
Power supply | ||
Power consumption..…..……… | 12 Watts | |
Dimension(WxDxH)..… | 450 x 350 x 145 mm | |
Weight...........................…........… | 9.6 Kgs | |
For improvement purposes, specifications and design may be changed without notice.
3
