DOLBY 3 STEREO : Choose this setting to play back movies and music (especially Laser Discs, video cassettes and TV broadcasts with DOLBY SURROUND sound) when not using the rear speakers. You get a clear perception of the position and direction of the sound. DOLBY 3 STEREO combines the front and rear signals so that you can enjoy a regenerated sound field which has comparatively more lively presence and a more expansive feeling from the three front channels (front left, front right and center speakers) than that of ordinary stereo regeneration.
THEATER : Use this when watching movie sources that have a stereo soundtrack to enjoy the effect of being in a movie theater.
HALL : Hall mode works best for recorded concerts and other music programs. In this mode, the front speakers provide a normal stereo effect while the rear speakers provide a reverberated sound. This reverberation helps to simulate the sound you might hear at a live concert.
STADIUM : The "stadium" effect creates efficient, reverberated sounds in order to obtain an expansive sound field. For music sources like a rock concert, you will feel as if you were actually at the live concert and seated very close to the stage. For sports programs, such as a baseball game, you can enjoy a powerful sound, thus obtaining the true stadium effect.
OFF : Turns off the center and rear speakers for normal stereo operation.
Note : Dolby Pro Logic, Dolby 3 Stereo, Theater, Hall and Stadium will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.
SURROUND MODE CONTROL
Each surround mode has programmed values for center- mode, center and rear levels and/or for rear channel time delay (as appropriate).
These values will then be kept in the memory until they are changed again.
The various values that can be adapted in the different surround modes are described next:
DOLBY PRO LOGIC
Press DOLBY PRO LOGIC or use the SURROUND MODE button on the remote control.
Press the CENTER MODE button to select the required center channel mode :
NORMAL – If the center speaker is a smaller model, which means it will not reproduce bass as deep or as loud as the left and right speakers.
WIDE – If all three front speakers are identical and capable of reproducing low bass information, and if equal power is available in the left, center and right amplifiers. PHANTOM – If no center speaker is installed.
Use the REAR LEVEL buttons to adjust the rear level (related to the front level).
–REAR 0 dB lights up on the display.
–The level will be indicated on the display : MIN,
Use the DELAY TIME button on the remote control to adjust the delay time of the rear channel.
–The delay time of the rear channel is changed to 16, 18,
20, , 30 milli seconds.
AMPLIFIER
Use the CENTER LEVEL buttons to adjust the center level.
–CENTER 0 dB lights up on the display.
–The level will be indicated on the display : MIN,
DOLBY 3 STEREO
Press the DOLBY 3 STEREO or use the SURROUND MODE button on the remote control.
CENTER MODE : In Dolby 3 Stereo mode, you can only select NORMAL and WIDE.
CENTER LEVEL : use the CENTER LEVEL buttons to adjust the center level as described above.
REAR LEVEL : adjusting the rear level is not available in Dolby 3 Stereo mode.
DELAY TIME : adjusting the delay time of the rear channel is not available in Dolby 3 Stereo mode.
THEATER, HALL, STADIUM
Press the THEATER, HALL, STADIUM respectively or use the SURROUND MODE button on the remote control. CENTER MODE and CENTER LEVEL are not available in these modes.
Use the REAR LEVEL buttons to adjust the rear level as described above.
Use the DELAY TIME button on the remote control to adjust the delay time of the rear channel as described above.
– The delay time is changed to 08,16, , 96 milli seconds.
TEST TONE
Use TEST TONE function on the remote control to obtain the correct balance between the levels of the left, right, center and rear speakers in the DOLBY PRO LOGIC and DOLBY 3 STEREO mode.
DOLBY PRO LOGIC
Press the TEST TONE button on your remote control. You will hear a test tone from the left (FL), center (C), right (FR) and rear (R) speakers in turn, in repeating a cycle.
While sitting in the usual listening position, adjust the level of each speaker until they all sound equally loud.
Use the VOLUME control to adjust the speaker levels.
–The levels will be indicated on the display .
When you are satisfied with the levels, press the TEST TONE button on your remote control again to turn off the test tone.
DOLBY 3 STEREO
In the Dolby 3 Stereo mode you can adjust only the levels of the left, right and center speakers.
Manufactured under license from Dolby Laboratories
Licensing Corporation. "Dolby", 
and "PRO LOGIC" are trademarks of Dolby Laboratories Licensing Corporation.
ENGLISH
9
