ENGLISH
OTHER POSSIBILITIES
Enjoying other video input during dubbing Example)Enjoying VCR 2 on TV monitor and from speakers
during dubbing from LDP to VCR 1 Select VCR 2 as the input being enjoyed.
Select LDP as recording source with the VCR 1 RECORD button.
Start recording on the VCR 1 Start play on the LDP.
Start playback on the VCR 2.
The audio and video signals from LDP will be dubbed onto the tape in VCR 1 and you can enjoy VCR 2.
Dubbing and enjoying the audio and video signals separately
Example)Dubbing and enjoying LD video signal and CD audio signal
Select LDP as the input being played.
Select SOURCE as recording source with the VCR 1 RECORD button.
Select LDP as video source within 5 seconds with INPUT SELECTOR.
Press the MEMORY/ENTER button to memorize within 5 seconds.
Select CD as audio source within 5 seconds with INPUT SELECTOR.
Press the MEMORY/ENTER button to memorize within 5 seconds.
–In the above steps, if it elapses 5 seconds, repeat again. Start recording on the VCR 1.
Start play on the LDP. Start play on the CDP.
–The audio signal from CDP and the video signal from LDP will be dubbed onto the tape in VCR 1 and you can enjoy them on TV monitor and from speakers.
CHECKING THE VIDEO COMPONENTS CONNECTED
Use this function to check the video components connected to LDP, VCR 1 and VCR 2 jacks each.
During play on the video components, press the VIDEO LABELS and the VCR 1 REC buttons simultaneously.
–The respective input or its label scrolls on the display and you can check its video and audio contents in turn as follows;
LDP 
VCR1 
VCR2
During recording, do not check the video components connected.
MODEL |
|
|
|
POWER AMPLIFIER SECTION |
|
|
|
POWER OUTPUT (8 Ohms) |
|
|
|
STEREO MODE | 125W x 2 |
THD | 0.05% |
IM DISTORTION | 0.05% |
POWER OUTPUT (8 Ohms) |
|
SURROUND MODE (LEFT, CENTER, RIGHT) | 100W x 3 |
REAR | 100W |
PREAMPLIFIER SECTION |
|
INPUT SENSITIVITY/IMPADANCE |
|
|
|
PHONO (47K Ohms) | 2.5mV |
LINE (CD, TAPE, VIDEO, @ 47K Ohms)) | 150mV |
SIGNAL TO NOISE RATIO |
|
|
|
PHONO | 77dB |
LINE (CD,TAPE,VIDEO) | 100dB |
TONE CONTROLS |
|
|
|
BASS (100Hz) | |
TREBLE (10kHz) | |
CINEMA BASS |
|
|
|
BASS @ 80Hz LEFT /RIGHT, CENTER | 6dB,4dB |
FREQUENCY RESPONSE |
|
PHONO | |
LINE (CD, TAPE, VIDEO, | |
FM TUNER SECTION |
|
USABLE SENSITIVITY (MONO) | 10.5dBf |
50dB QUIETING SENSITIVITY |
|
|
|
MONO | 15dBf |
STEREO | 36.2dBf |
SIGNAL TO NOISE RATIO 65dBf,MONO/STEREO | 80dB/73dB |
THD @ 65dBf, 1kHz, MONO/STEREO | 0.15%/0.25% |
FREQUENCY RESPONSE | |
STEREO SEPARATION (1kHz) | 50dB |
CAPTURE RATIO | 1.25dB |
ALTERNATE CHANNEL SENSITIVITY ( @ 98MHZ, | 70dB |
IMAGE REJECTION RATIO | 80dB |
IF REJECTIOR RATIO | 120dB |
SPURIOUS REJECTION RATIO | 70dB |
AM TUNER SECTION |
|
|
|
USABLE SENSITIVITY (400u V/m) | 12.5uV |
SIGNAL TO NOISE RATIO | 50dB |
SELECTIVITY | 30dB |
DIMENSIONS and WEIGHTS (Unit) |
|
HEIGHT (INCHES) | 6 1/8 |
WIDTH (INCHES) | 17 3/8 |
DEPTH (INCHES) | 15 |
WEIGHT (LBS) |
|
|
|
Note : Design and specifications subject to change without notice for improvements.
MAINTENANCE
Do not leave the unit in direct sunlight or other places where high temperatures can occur for any length of time, such as in the vicinity of a heating source.
Do not expose the equipment to humidity or rain.
A chamois leather cloth, slightly moistened with water is sufficient for cleaning the cabinet.
Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives.
12
