Adjusting the current channel level
ENGLISH
•After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. (For details, refer to “When selecting the CHANNEL LEVEL” on page 39.)
1.Select the desired channel.
• Each time this button is pressed, the channel is selected as
| follows: |
|
|
|
|
|
|
|
|
| → L → C → R | → SR | → (SBR → SBL) |
| |||||
|
| ||||||||
| Front | Center Front | Surround | Surr. Back | Surr. Back | ||||
| Left |
| Right | Right |
| Right | Left | ||
|
|
| SW | ← | SL | ← |
|
|
|
|
|
|
|
|
| ||||
|
|
| Subwoofer | Surround Left |
|
| |||
( ) : Possible only when the surround back speaker is set to 2ch (“x2”) or 1ch (“x1”)
• When the channel level disappears, press this button again.
• Depending on the speaker settings (“NO”), etc., some channels cannot be selected.
2. Adjust the level of the selected channel as desired.
• The channel levels can be adjusted within the range of
■Note:
• When selecting the VuNow as an input source, you cannot adjust the channel levels.
3. Repeat the above steps 1 and 2 to adjust each channel level.
26
