Sherwood R-904 manual When selecting the SPEAkER DISTANCE, English, About the speaker distance

R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 40

ENGLISH

When selecting the SPEAkER DISTANCE

1. Press the CURSOR UP/DOWN buttons to select the “DISTANCE”, then press the ENTER button.

• Then “L ~” will be displayed.

2. Press the CURSOR UP/DOWN buttons to select the desired speaker.

■Note :

• You cannot select the speakers set to “NO”.

3. Press the CURSOR LEFT/RIGHT buttons to set the selected speakers as desired.

• You cannot set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals.

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

■About the speaker distance

When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround, surround back and subwoofer speakers should be the same distance from the main listening position as the front speakers. By entering the distance between the listening position and each speaker, the delay times of center, surround, surround back and subwoofer speakers are automatically adjusted to create an ideal listening environment virtually as if the center, surround, surround back and subwoofer speakers were at their ideal locations respectively.

40