ENGLISH
Adjusting the tone(bass and treble)
Enter the tone mode.
10
TONE MODE
•Each time this button is pressed, the corresponding tone mode is selected and shown for 3 seconds as follows:
BASS 
TRBL(treble)
Note: When the TONE DIRECT indicator is lighting up, the tone mode cannot be entered.
At the desired tone mode, adjust the tone
11 as desired.
ADJUST
•If the tone display disappears, start from the step 10 again.
Notes:
•Extreme settings at high volume may damage your speakers.
•When the digital signals from Dolby Digital program sources are input in available surround mode, the tone cannot be adjusted and the tone direct function is automatically switched to ON.
To listen to a program source without the
12 tone effect.
TONE
DIRECT
•The TONE DIRECT indicator lights up and the sound that bypasses the tone circuitry will be heard.
•To cancel the tone direct function, press this button again.
12
