Sherwood RD-6500 manual Recording with Tape Monitor, Dubbing from video components onto

ENGLISH

RECORDING

•The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded.

•The volume and tone (bass, treble) settings have no effect on the recording signals.

Recording with TAPE MONITOR				Start recording on the TAPE MONITOR.
1	Select the desired input as a recording			2
	source except for TAPE MONITOR.
			VIDEO1
	AUDIO	VIDEO	VIDEO2	Start play on the desired input.
			VIDEO3	3
			CD
		or	TUNER
			AUX
				• For tape monitor function, refer to “TAPE
• Be sure that “TAPE M” goes off.				MONITOR function” on page 10.
Dubbing from video components onto				Start recording on the VIDEO 1.
				2
VIDEO 1
1	Select VIDEO 2 or VIDEO 3 as a recording
	source.			Start play on the VIDEO 2 or the VIDEO 3.
		VIDEO	VIDEO2
		or	VIDEO3	3
				• The audio and video signals from the VIDEO 2 or the
				VIDEO 3 will be dubbed onto the VIDEO 1 and you
				can enjoy them on the TV set and from the speakers.
Dubbing the audio and video signals				Select CD as an audio recording source.
separately onto VIDEO 1				2
Example) When dubbing the VIDEO 2 video signal
	and the CD audio signal separately onto
	VIDEO 1.			AUDIO
				CD

Select VIDEO 2 as a video recording source.

1		or
	VIDEO	VIDEO2
		or

22