Operations
LISTENING TO RADIO BROADCASTS
Auto tuning
Turn the power on.
1
Each time the POWER switch is pressed, this unit is turned on or off.
Press the TUNING UP( ) or DOWN( )
3 button for more than 0.5 second.
This unit will now search until a station of sufficient strength has been found.
The display shows the tuned frequency and “TUNED”. If the station found is not the desired one, simply repeat this operation.
Weak stations are skipped during auto tuning.
Select the desired band.
2
Example) When selecting the FM band.
MHz
Each time the AM button is pressed, the band changes as follows;
MW LW
Manual tuning
Manual tuning is useful when you already know the frequency of the desired station.
Perform the steps 1~2 in “Auto tuning” porocedure and press the TUNING UP( ) or DOWN( ) button repeatedly until the desired frequency has been reached.
ENGLISH
LISTENING TO FM STEREO BROADCASTS
While listening to FM brodcasts, select the desired FM mode.
Each time this button is pressed, the FM mode changes as follow;
STEREO mode : “ST” lights up
MONO mode : “ST” goes off
When FM stereo broadcasts are poor because of weak brocasts signals, select the FM mono to reduce the noise, then FM broadcasts are reproduced in monaural sound.
9
