Sherwood TX-5090C, TX-5090RDS manual RDS search, TP search

ENGLISH

Additional Function for TX-5090RDS Only

LISTENING TO RDS BROADCASTS(FM only)

RDS(Radio Data System) is a method for sending information signals together with the transmitter signals.. Your tuner is capable of translating these signals and putting the information on the display.

These codes contain the following informations.

Program service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).

							2	While displaying “RDS SRCH”, start
			RDS search
								searching.
	Use this function to automatically search and receive the
	stations offering RDS services.
			In the FM mode, select the RDS search mode.
1
							The tuner automatically searches a station offering RDS
							services and the station name is displayed.
							If the station found is not the desired one, press the
	Each time this button is pressed, the search mode changes						TUNING UP( ) or DOWN( )button again while the
	as follows;						RDS indicator is flickering.
							When “RDS SRCH” disappears, repeat again from the
							above step 1.
		RDS SRCH TP SRCH			PTY SRCH	OFF
							If no station is found, “NO RDS” is displayed.
								While displaying “TP SRCH”, start searching.
			TP search				2
		Use this function to automatically search				and receive
		the stations broadcasting		the traffic program.

In the FM mode, select the TP search mode.

1

	The tuner automatically searches for stations
	broadcasting the traffic program.
	”NO TP” is displayed if the signal is too weak or there
	are no stations broadcasting the traffic program.
TP SRCH” is displayed.	When “TP SRCH” disappears, repeat again from the
	above step 1.

12