Runco XP-OPAL50, XP-OPAL65 operation manual Transparency cannot be used when Insert is set to on

Operation

•TRANSPARENCY/TRANSPARENCY LEVEL: If you are using the Blend PIP feature, you can make the overlay (sub) image transparent so that the main (background) image shows through.

To do this, select TRANSPARENCY from the MULTI PIP SETUP menu and set it to ON. Then, select TRANSPARENCY LEVEL from the MULTI PIP SETUP menu to control the degree to which you want the main image to show through.

TRANSPARENCY = 0% TRANSPARENCY = 50% TRANSPARENCY = 90%

A B C D A B C D A B C D

TRANSPARENCY cannot be used when INSERT is set to ON.

Note

•INSERT/INSERT LEVEL: If you are using the Blend PIP feature, you can divide the overlay (sub) image into transparent and non-transparent areas. The CinemaWall then “inserts” only the non-transparent areas of the overlay image into the main (background) image.

To use this feature, select INSERT from the MULTI PIP SETUP menu and set it to ON. Then, select INSERT LEVEL from the MULTI PIP SETUP menu to set the brightness level threshold for distinguishing between the transparent and non-transparent areas of the overlay image.

INSERT LEVEL = 1%

A B C D

INSERT LEVEL = 5%

A B C D

INSERT LEVEL = 10%

A B C

INSERT cannot be used when TRANSPARENCY is set to ON.

Note

44 CinemaWall Installation/Operation Manual