CinemaWall Specifications | Runco XP-OPAL65, XP-OPAL50 specification

7. Specifications

Table 7-1lists the CinemaWall specifications.

Table 7-1. CinemaWall Specifications

Native Resolution:	1920 x 1080

Screen Size:	XP-50, XP-OPAL50:
	43.50 in. W x 24.50 in. H (1106.0 x 622.0 mm)
	50 in. (1270.0 mm) diagonal
	XP-65, XP-OPAL65:
	56.50 in. W x 31.80 in. H (1434.0 x 807.0 mm)
	65 in. (1646.0 mm) diagonal

Screen Aspect Ratio:	16:9

Available Aspect Ratios:	Refer to Table 4-1

DTV Compatibility:	480p, 720p, 1080i, 1080p

Contrast Ratio:	30,000:1 maximum

Data/Graphics Compatibility:	VGA, SVGA, XGA, SXGA, UXGA (compressed)
	Horiz. scan frequency = 15 to 110 kHz
	Vert. scan frequency = 48 to 120 Hz

Video Inputs:	(4) Digital Video (HDMI 1.2A with HDCP)
	(1) Component/RGB (BNCx3) with Stereo Audio (RCAx2)
	(1) PC (15-pin D-Sub)
	(1) RS-232 (9-pin, D-sub male)

Audio System	Internal amplifier
	Output Power = 10W RMS x 2 at 8Ω

Power Requirements:	100 to 240 VAC, 50/60Hz

Power Consumption:	XP-50,XP-OPAL50:605 W (0.9 W in standby), maximum
	XP-65,XP-OPAL65:755 W (1.0 W in standby), maximum

Operating Environment:	40ºF to 95ºF (5ºC to 35ºC);
	20% to 80% humidity (non-condensing)
	Ambient air pressure = 720 hPa, minimum
	Altitude = up to 9,100 feet (2,774 meters)

Dimensions:	XP-50, XP-OPAL50: See Figure 7-1
	XP-65, XP-OPAL65: See Figure 7-2

Weight	XP-50,XP-OPAL50:93.0 lbs. (42.18 kg)
(panel only, without stand):	XP-65,XP-OPAL65:163.1 lbs. (73.98 kg)

Regulatory Approvals:	Complies with FCC Part 15 Class B, ICES-003, UL6500
	Ver.2

Specifications are subject to change without notice.

7.1 CinemaWall Specifications

CinemaWall Installation/Operation Manual

63

Image 77

Runco XP-OPAL65, XP-OPAL50 operation manual CinemaWall Specifications

Contents

XP-65 XP-50Page RuncoCare Standard Features RuncoCare Standard Two Year Limited Warranty RuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance Information FCC Part Page Table of Contents Specifications Maintenance and TroubleshootingAppendix A. Default Settings Operation List of Figures List of Figures Xiv Introduction Carriage return must be used after each command or stringAbout This Manual Target Audience Certain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunction Key Features and Benefits Description, Features and Benefits Optional Accessories XP-50 and XP-OPAL50 CinemaWall at a Glance Controls and IndicatorsControls and Functions Display Stand XP-50 / XP-OPAL50 XP-65 / XP-OPAL65 Connectors Power Input Surround button CinemaWall Remote Control Controls and Functions Other surfaces InstallationRemote Control Installation must be performed by a qualified custom video Quick SetupInstallation specialist Step Procedure For Details, refer to Installation Considerations Ventilation Ambient Light Other Considerations Connections to Connecting SourceCinemaWall Components to DVD Analog RGB Connections Connector Pin Assignments Connecting External Speakers OptionalRS-232 Controller Connection AC Power Connection Operation Turning on the Power Changing the OSD LanguageSetting the Day and Time Setting the Computer Display Properties Aspect ratio selection is saved independently for each input Selecting an Input Source Changing the Aspect Ratio 149 169 Source image horizon 43 431 linearly scalesPlayed at the left and right Edges of the screen Activating PIP Swapping the Main PIP Images Using Picture-In-Picture PIP Selecting a PIP Target Using the On-Screen MenusScreen or Input Source Changing the PIP Window Position POS./SIZE Options Picture This control is not available when Picture Menu is set to Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness POS./SIZE CinemaWall memorizes position and size settings separately Frequency is 108 MHz or greater Options menu refer to page 50 is set to On Sound Or 1080p and the Aspect Ratio is set to 169 refer to SET UP Signal Screensaver Is active On the remote control unit, or cycle power to the CinemaWall Order to activate multi-display mode, you must first set Refer to Changing the OSD Language on On hides joints between displays C D Insert cannot be used when Transparency is set to on Transparency cannot be used when Insert is set to on Present Time Setup Refer to Setting the Day and Time on Command Timer refer to DVD3 Operation Refer to Return Change Currently active Level see below Some cases, power is transmitted to the slot when When using multiple displays such as in a video wall RuncoMULTI-DISPLAY is active Picture menu is set to Warm On page 21, the Clock Display setting has no effect Using Digital ZoomDuring the delay period, the power indicator flashes green Operation Cleaning Maintenance and TroubleshootingCleaning the Display Panel Body and Remote Control Cleaning the Screen Symptom Possible Causes Solution Troubleshooting Tips Command 3 bytes Parameter 6 bytes Command 3 bytes Parameter 3 bytesSerial Communications Examples Hex Description Serial Commands Damzoom IMSPC1 SSCFNC0 VDO VWBGCT-30 Serial Communications CinemaWall Specifications Specifications CinemaWall Dimensions 12.31 Supported Timings Supported Signal Timings by Input Specifications Table A-1. Runco Factory Default Settings for CinemaWall Appendix A. Default Settings Default Settings Page 020-0970-01 Rev. a September