RS-232 Controller, Connection | Runco XP-OPAL65, XP-OPAL50 specs

Installation

Use a straight-through RS-232 cable with a 9-pin male connector to connect a PC or		RS-232 Controller
home theater control/automation system (if present) to the RS-232 port on the		Connection
CinemaWall; see Figure 3-5.
For more information about using this connection, refer to Serial Communications on
page 55.
Personal Computer	(Male)
(or Control/Automation System)	(Male)

SERIAL

RS-232C Straight Cable

9-pin

Connector Pin Assignments:

1 2 3 4 5

6 7 8 9

2	Receive Data
3	Transmit Data
5	Ground
1, 4, 6, 9	Not Connected
7, 8	(shorted together)

Figure 3-5. RS-232 Control System Connection

Connect the (positive) and (negative) speaker wires to the SPEAKER-R and SPEAKER-L terminals; see Figure 3-6.Maintain the correct polarity. For more information, refer to the owner’s manual for your speakers.

Connecting External Speakers (Optional)

Speaker

Terminal (R)

Speaker Terminal (R)

1
2	1
	1
	2

Figure 3-6. External Speaker Connection

CinemaWall Installation/Operation Manual

19

Image 33

Runco XP-OPAL65, XP-OPAL50 RS-232 Controller, Connection, Connecting External Speakers Optional, Connector Pin Assignments

Contents

XP-65 XP-50Page RuncoCare Standard Features RuncoCare Standard Two Year Limited Warranty RuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance Information FCC Part Page Table of Contents Specifications Maintenance and TroubleshootingAppendix A. Default Settings Operation List of Figures List of Figures Xiv Introduction Carriage return must be used after each command or stringAbout This Manual Target Audience Certain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunction Key Features and Benefits Description, Features and Benefits Optional Accessories XP-50 and XP-OPAL50 Controls and Indicators Controls and FunctionsCinemaWall at a Glance Display Stand XP-50 / XP-OPAL50 XP-65 / XP-OPAL65 Connectors Power Input Surround button CinemaWall Remote Control Controls and Functions Installation Remote ControlOther surfaces Installation must be performed by a qualified custom video Quick SetupInstallation specialist Step Procedure For Details, refer to Installation Considerations Ventilation Ambient Light Other Considerations Connections to Connecting SourceCinemaWall Components to DVD Analog RGB Connections Connector Pin Assignments Connecting External Speakers OptionalRS-232 Controller Connection AC Power Connection Turning on the Power Changing the OSD Language Setting the Day and TimeOperation Setting the Computer Display Properties Aspect ratio selection is saved independently for each input Selecting an Input Source Changing the Aspect Ratio 149 169 Source image horizon 43 431 linearly scalesPlayed at the left and right Edges of the screen Activating PIP Swapping the Main PIP Images Using Picture-In-Picture PIP Selecting a PIP Target Using the On-Screen MenusScreen or Input Source Changing the PIP Window Position POS./SIZE Options Picture This control is not available when Picture Menu is set to Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness POS./SIZE CinemaWall memorizes position and size settings separately Frequency is 108 MHz or greater Options menu refer to page 50 is set to On Sound Or 1080p and the Aspect Ratio is set to 169 refer to SET UP Signal Screensaver Is active On the remote control unit, or cycle power to the CinemaWall Order to activate multi-display mode, you must first set Refer to Changing the OSD Language on On hides joints between displays C D Insert cannot be used when Transparency is set to on Transparency cannot be used when Insert is set to on Present Time Setup Refer to Setting the Day and Time on Command Timer refer to DVD3 Operation Refer to Return Change Currently active Level see below Some cases, power is transmitted to the slot when When using multiple displays such as in a video wall RuncoMULTI-DISPLAY is active Picture menu is set to Warm Using Digital Zoom During the delay period, the power indicator flashes greenOn page 21, the Clock Display setting has no effect Operation Cleaning Maintenance and TroubleshootingCleaning the Display Panel Body and Remote Control Cleaning the Screen Symptom Possible Causes Solution Troubleshooting Tips Command 3 bytes Parameter 6 bytes Command 3 bytes Parameter 3 bytesSerial Communications Examples Hex Description Serial Commands Damzoom IMSPC1 SSCFNC0 VDO VWBGCT-30 Serial Communications CinemaWall Specifications Specifications CinemaWall Dimensions 12.31 Supported Timings Supported Signal Timings by Input Specifications Table A-1. Runco Factory Default Settings for CinemaWall Appendix A. Default Settings Default Settings Page 020-0970-01 Rev. a September