Picture | Runco XP-OPAL50, XP-OPAL65 guide

Operation

PICTURE ➤ Use the controls in the PICTURE menu to calibrate your CinemaWall for optimum picture quality.

The CinemaWall has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF-certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program material, Runco recommends using the following calibration tools for best results:

•External test pattern source – Ovation Multimedia, Video Essentials or AVIA test DVD (or equivalent).

•A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as follows. Perform the adjustments in the order listed here.

PICTURE

1/2

NORMAL

RESET

PICTURE MENU

STANDARD

PICTURE

26

BRIGHTNESS

0

COLOR

0

TINT

0

SHARPNESS

5

RETURN

RESET

ADJUST

SELECT

PICTURE

2/2

COLOR TEMP

NORMAL

COLOR MANAGEMENT

OFF

ADVANCED SETTINGS

OFF

RETURN

RESET

CHANGE

SELECT

30	CinemaWall Installation/Operation Manual

Image 44

Runco XP-OPAL50, XP-OPAL65 operation manual Picture

Contents

XP-50 XP-65Page RuncoCare Standard Two Year Limited Warranty RuncoCare Standard Features RuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Compliance Information Declaration of Conformity FCC Part Page Table of Contents Maintenance and Troubleshooting SpecificationsAppendix A. Default Settings Operation List of Figures List of Figures Xiv Carriage return must be used after each command or string IntroductionAbout This Manual Target Audience Using This Manual Certain featuresSignificance. They also provide supplemental information Degrade performance or cause a malfunction Description, Features and Benefits Key Features and Benefits Optional Accessories XP-50 and XP-OPAL50 CinemaWall at a Glance Controls and IndicatorsControls and Functions Display Stand Connectors XP-50 / XP-OPAL50 XP-65 / XP-OPAL65 Power Input CinemaWall Remote Control Surround button Controls and Functions Other surfaces InstallationRemote Control Quick Setup Installation must be performed by a qualified custom videoInstallation specialist Step Procedure For Details, refer to Installation Considerations Ambient Light Ventilation Other Considerations Connecting Source Connections toCinemaWall Components to DVD Analog RGB Connections Connecting External Speakers Optional Connector Pin AssignmentsRS-232 Controller Connection AC Power Connection Operation Turning on the Power Changing the OSD LanguageSetting the Day and Time Setting the Computer Display Properties Selecting an Input Source Changing the Aspect Ratio Aspect ratio selection is saved independently for each input 169 149 43 431 linearly scales Source image horizonPlayed at the left and right Edges of the screen Using Picture-In-Picture PIP Activating PIP Swapping the Main PIP Images Using the On-Screen Menus Selecting a PIP TargetScreen or Input Source Changing the PIP Window Position POS./SIZE Options Picture This control is not available when Picture Menu is set to Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness CinemaWall memorizes position and size settings separately POS./SIZE Options menu refer to page 50 is set to On Frequency is 108 MHz or greater Or 1080p and the Aspect Ratio is set to 169 refer to Sound SET UP Signal Screensaver Is active On the remote control unit, or cycle power to the CinemaWall Refer to Changing the OSD Language on Order to activate multi-display mode, you must first set On hides joints between displays C D Transparency cannot be used when Insert is set to on Insert cannot be used when Transparency is set to on Command Timer refer to Present Time Setup Refer to Setting the Day and Time on DVD3 Operation Return Change Refer to Level see below Currently active When using multiple displays such as in a video wall Runco Some cases, power is transmitted to the slot whenMULTI-DISPLAY is active Picture menu is set to Warm On page 21, the Clock Display setting has no effect Using Digital ZoomDuring the delay period, the power indicator flashes green Operation Maintenance and Troubleshooting CleaningCleaning the Display Panel Body and Remote Control Cleaning the Screen Troubleshooting Tips Symptom Possible Causes Solution Command 3 bytes Parameter 3 bytes Command 3 bytes Parameter 6 bytesSerial Communications Examples Serial Commands Hex Description Damzoom IMSPC1 SSCFNC0 VDO VWBGCT-30 Serial Communications Specifications CinemaWall Specifications CinemaWall Dimensions 12.31 Supported Timings Supported Signal Timings by Input Specifications Appendix A. Default Settings Table A-1. Runco Factory Default Settings for CinemaWall Default Settings Page 020-0970-01 Rev. a September