Operation

Initial Power Mode: Select Initial Power Mode from the OPTIONS menu to control how the CinemaWall recovers from a power interruption (resulting either from a power failure or from being unplugged, then plugged back in):

Normal: The CinemaWall returns to whatever power-on state it was in before the power interruption.

Standby: The CinemaWall comes on in standby mode. The power indicator lights red or orange.

On: The CinemaWall returns to “power on” mode. The power indicator lights green.

When using multiple displays – such as in a video wall – Runco

Note recommends setting this to “Standby” in order to minimize power load.

ID select/Remote ID/Serial ID: These menu options do not currently apply to the

CinemaWall.

Display size: Select Display size from the OPTIONS menu and set it to On to reduce the size of the displayed image by approximately five percent (5%).

Note

1. This setting is not available when MULTI-PIP, Digital Zoom or

MULTI-DISPLAY is active.

2.When Display size is set to On, the H-SIZE/V-SIZEcontrols (in the POS./SIZE menu) are not available and only the 16:9 and 4:3 aspect ratios can be selected.

Studio W/B: Select Studio W/B from the OPTIONS menu and set it to On to set the color temperature to a level appropriate for television broadcast applications.

Note

Setting Studio W/B to On has no effect unless the COLOR TEMP

(in the PICTURE menu) is set to WARM.

Studio Gain: Select Studio Gain from the OPTIONS menu and set it to On to sharpen the contrast for a better view when a part of the image is too light to see.

Slot power: Select Slot power from the OPTIONS menu to control when power is transmitted to the terminal boards installed in SLOT1, SLOT2 and SLOT3. Choose one of the following:

Off: Power is not transmitted to the slot power.

Auto: Power is transmitted to the slot power only when main power is on.

On: Power is transmitted to the slot power when main power is on or in the standby state.

In some cases, power is transmitted to the slot when the

Note CinemaWall is on or in the standby state regardless of the Slot power setting.

50

CinemaWall Installation/Operation Manual

Page 64
Image 64
Runco XP-OPAL50, XP-OPAL65 When using multiple displays such as in a video wall Runco, MULTI-DISPLAY is active