Olympus D-450 manual Panorama Mode, How to take panoramas, 112

Function
button
Touche de	Control panel	+/– buttons
fonction		Touches (+/–)
	Écran de commande
Botón de		Botones +/–
	Panel de control
función

E

PANORAMA MODE

How to take panoramas

1Press the Function button to select the Function card mode (Panorama mode).

●The LCD monitor turns on automatically. (p. 76)

2The connecting direction (right, left, up, down) can be selected with the +/– buttons.

112

Function card mode

Carte de fonction

Modo de tarjeta de función

Overlap the left end of the picture with the right end of the previous picture (when shooting to the right).

Faire se chevaucher le bord gauche de la photo et le bord droit de la vue précédente (chronologie de prise de vues vers la droite).

Superponga el extremo izquierdo de la imagen con el extremo derecho de la imagen anterior (cuando fotografíe hacia arriba).

●The boxes appear on the LCD monitor.

3Press the Function button again to cancel the

Panorama mode.

4Follow directions carefully for the supplied panorama application to successfully assemble panorama

images.

●Panorama images must be assembled on a computer.

Note:

◆The Panorama mode is available only when a Standard card is used.

◆The flash cannot be used in the Panorama mode.

◆Because the focus, the exposure, and the white balance are determined by the first picture, do not shoot overly bright/dark subjects such as the sun in the first frame.

◆Do not move the Zoom lever after shooting the first picture to avoid problems with picture assembly.

◆Use of the Standard Quality mode is recommended to save memory.