Olympus D-450 manual Random Print, 170

LCD Monitor

Écran ACL

Monitor LCD

Function button

Touche de fonction

Botón de función

+/– buttons Touches (+/–) Botones +/–

SETOK 3

E

RANDOM PRINT

You can select a series of pictures to be direct- printed to the P-300 printer.

1Connect the camera with the printer, turn on the power, then press the Function button in the Display mode to select the Random Print mode.

2Select frames with the +/– buttons and press the OK button at each picture to be printed.

●When the OK button is pressed for three seconds, the camera produces a beep sound and enters the All-Frame print mode. When the button is held down for another two seconds, the camera produces the beep sound again and erases the selection data.

OK button

Touche OK

Botón OK

Press for 3 seconds — All print Press for 5 seconds — All cancel

Touche maintenue enfoncée durant 3 secondes : impression de toutes les données.

Touche maintenue enfoncée durant 5 secondes : effacement de toutes les données.

Presione durante 3 segundos — Impresión completa Presione durante 5 segundos — Cancelación de la selección

170

3Enter the number of copies to be printed on the printer, then press the DIRECT PRINT button to start printing.

●See page 164 for connection to the printer.

Note:

◆This mode is available only when the camera is connected to the P-300 printer.

◆The data for the Random Print are stored in the card even after printing.

◆Canceling the Print mode or turning off the power erases the Random Print request.

◆The use of the optional AC adapter is recommended.