Olympus D-450 manual ALL-FRAME Erase, 150

LCD Monitor

Écran ACL

Monitor LCD

Menu button

Touche de menu

Botón de menú

+/– buttons Touches (+/–) Botones +/–

NEXT SET

OK button

Touche OK

Botón OK

E

ALL-FRAME ERASE

This function works when the lens barrier is closed.

1Display a picture, then press the Menu button.

2 Press the – button to select All-Frame erase .

●Press the Menu button to cancel.

3Press the OK button to erase all pictures.

●The camera makes a short single beep and the All-Frame Erase indicator starts moving to the right.

4All pictures are erased after a few seconds. The blue background display will appear on the LCD monitor.

●If there are any protected pictures, they will not be erased and the protected picture last taken will be displayed when the erasing operation is completed.

●All-Frame Erase is also available in the Index-Display mode. (p. 134)

150

Caution:

◆Be careful not to erase important picture data by mistake as it cannot be retrieved.

◆Never open the card cover, eject the card, remove the batteries, or pull the plug while erasing pictures. It may destroy the data in the card.

◆Do not press the Erase button while an image is being loaded onto the LCD.