Olympus D-450 manual Card Format, 158

Menu button
Touche de menu	Control panel
Botón de menú
	Écran de
	commande
	Panel de control
LCD Monitor
Écran ACL
Monitor LCD

NEXT SET

+/– buttons Touches (+/–) Botones +/–

OK button

Touche OK

Botón OK

158

E

CARD FORMAT

1Press the Menu button in the Display mode, and select Card format.

●When the card needs to be formatted, the Card error indicator lights on the control panel, and the camera automatically enters the Card format mode.

2Select Card format with the – button.

3Press the OK button to start formatting (the Card error indicator blinks). Press the LCD monitor ON/OFF button to cancel the format.

4When the card formatting is done, the Card error indicator will disappear.

Note:

◆Formatting the card erases the existing data, including pictures which have been write- protected from the camera. Be careful not to erase important data when formatting a recorded card.

◆Formatting is not engaged when the write-protect adhesive seal is placed on the card.

◆Non-Olympus brand cards or cards formatted from or used in a computer must be formatted by the camera. These cards may take longer to record than recommended Olympus brand cards.