Olympus D-450 manual ONE-FRAME Erase, You can delete pictures you do not want, 144

LCD Monitor

Écran ACL

Monitor LCD

3

NO YES 3

Erase button Touche d’effacement Botón de borrado

OK button

Touche OK

Botón OK

E

ONE-FRAME ERASE

You can delete pictures you do not want.

When the picture is protected or the write-protect adhesive seal is placed on the card, the camera does not enter the Erase mode.

1Display the picture you want to erase.

2Press the Erase button until the One-Frame Erase indicator in the upper right corner of the LCD monitor lights.

●To cancel, press the Erase button again.

3Press the OK button to erase the selected picture.

●The camera makes a short single beep and the selected picture is erased.

●One-Frame erase is also available in the Index-Display mode. (p. 134)

●See page 150 for performing All-Frame erase.

●It may take longer to erase when Print Reserve has been set in the card.

144

Caution:

◆Never open the card cover, eject the card, remove the batteries, or pull the plug while erasing pictures. It may destroy the data in the card.

◆Do not press the Erase button while an image is being loaded onto the LCD.