LCD monitor ON/OFF button

Touche de marche/arrêt de l’écran ACL Botón ON/OFF del monitor LCD

3

DISPLAYING PICTURES ON

ETHE LCD MONITOR

TURNING ON THE LCD MONITOR

Close the lens barrier and press the LCD monitor ON/OFF button to turn on the LCD monitor.

When the monitor is turned on, the camera automatically checks the card. If there is no card in the camera, the Card error indicator blinks on the control panel. If the card is in another format and is unreadable, the camera enters the Card format mode. (p. 158)

The last picture taken is displayed on the LCD monitor. The frame number and the battery check indicator are also displayed, as well as the Date, Recording mode, and Protect indicators if they are set. When there are no pictures stored in the card, a blank blue screen is displayed.

Recording mode, Battery Remaining, Date and Frame number indicators will disappear after about three seconds. If the batteries are low, the low-battery indicator appears and blinks. Cancel the picture protection in order to make the Protect indicator disappear. (p. 142)

Note:

130

When turned on, the LCD monitor flashes, and pictures appear a few seconds later. This is not a malfunction.

Page 130
Image 130
Olympus D-450 manual Turning on the LCD Monitor, 130