Olympus D-450 manual Turning on the Power, When the card needs to be formatted

Slide open the lens barrier.

Faire coulisser le capot de protection de l’objectif.

Deslice el cubreobjetivo para abrirlo.

Control panel

Écran de commande Panel de control

Card error

Erreur carte

Error de tarjeta

Push up the flash.

Relever le flash.

Levante el flash.

Viewfinder

Viseur

Visor

Green lamp

Voyant vert

Lámpara verde

ETAKING PICTURES

TURNING ON THE POWER

To turn on the power, just slide open the lens barrier on the front of the camera. When it is turned on, it automatically checks the SmartMedia card. If there is a problem with the card, the camera emits a beep sound and displays the following:

When there is no SmartMedia card in the camera / the

card is protected...

The Card error indicator on the control panel and the Green lamp will blink.

When the card needs to be formatted...

The Card error indicator lights on the control panel, and the camera enters the Card format mode. (p. 158)

●Olympus brand cards are recommended (already formatted). Non-Olympus brand cards must be formatted by the camera.

Note:

60

◆If you do not operate the camera for three minutes, the camera will be set to the stand-by mode. After four hours in the stand-by mode, the power turns off automatically. (Time varies depending on the type of batteries used.)

◆To turn on again, close and open the lens barrier.

◆Set the date before taking pictures. (p. 156)