Olympus D-450 manual Pictures already taken do not appear on the LCD monitor, 200

E

The pictures already taken do not appear on the LCD monitor.

1The lens barrier has been left open.

[ Close the lens barrier and depress the LCD monitor

ON/OFF button to turn on the LCD monitor. (P. 130)

2There is no picture in the SmartMedia

[ Check the number of storable pictures. (P. 64)

The LCD monitor is hard to read.

1The brightness may be incorrectly set. [ Adjust the brightness. (P. 162)

When the camera is connected to a computer, an error message appears while data is being transferred to the computer.

1The cable is not plugged in correctly.

[Connect the cable correctly. (P. 186) 2 The power is OFF.

[Open the lens barrier to turn on the power. (P. 60) 3 The batteries are exhausted.

[Replace the batteries with new ones (P. 52) or use the optional AC adapter (P. 54).

4 The serial port is not selected correctly.

[Use the operating system software to make sure the serial port is selected correctly.

5 There is no available serial port.

[Make one available by following the computer’s instructions.

200