How do I make the initial settings for the Sherwood V-903 CD Player?

Refer to the 'Initial Settings' section on page 28 of the official manual for detailed instructions on making the initial settings for the Sherwood V-903 CD Player.

What should I do before starting playback on the Sherwood V-903 CD Player?

Before starting playback, ensure that the video output signal is selected correctly based on the connections. For details, refer to the 'SELECTING THE VIDEO OUTPUT SIGNAL' section on page 27 of the official manual.

How do I load a disc and start playback on the Sherwood V-903 CD Player?

To load a disc, open the disc tray and place the disc with the printed side up, then close the tray. For further details on starting playback, refer to the official manual.

Operations, Basic Playback, English, Preparations

V-903V(G) 2006.4.20 05:58 PM 페이지 13

Operations

■Before starting playback

•Make the initial settiings to suit your usage conditions the very first time this unit is turned on. (For details, refer to "Initial Settings" on page 28.)

•Depending on how to connect the video jack(s) to the A/V amplifier/receiver/TV, you should select the video output signal correctly. If not, no picture or abnormal picture may be shown. (For details, refer to "SELECTING THE VIDEO OUTPUT SIGNAL" on page 27.)

•For explanation purposes, this instructions explains the OSD (On-Screen Display) language displayed on TV in English.

•Usable discs for each operation/function are referred to by the icons;

BASIC PLAYBACK

■Preparations

• Turn on the TV and select the video input source connected to the unit.

• When you want to enjoy the sound of disc from the audio system, turn on the audio system and select the input source connected to the unit.

1	Before operation, enter the standby mode.

• The STANDBY indicator lights up. This means that the unit is connected to the AC mains and a small amount of current is retained to support operational readiness.

• To turn the power completely off, press the POWER ON/OFF switch again.

2	In the standby mode, turn the power on.

• Each time the POWER button on the remote control is pressed, the unit is turned on to enter the operating mode or off to enter the standby mode.

3	Open the disc tray to load a disc with the printed side up, then close it.

• 8 cm (3 inch) discs can be loaded on the inside circle of the tray, too.

• When a DVD that doesn’t contain any menu is loaded, playback automatically starts.

■Note:

•When you load a MP3, JPEG disc or a DVD Video that contains a menu, the menu display may appear on the TV screen. In this case, see "To start playback from the menu of DVD Video" or "To start playback from the menu of MP3 or JPEG disc" on next page.

• Example of DVD Video

• Example of MP3 disc

ENGLISH

Sherwood V-903 manual Operations, Basic Playback, English, Before starting playback, Preparations

Models: V-903