Sherwood V-903 manual To clear all programmed tracks, English, Continued

V-903V(G) 2006.4.20 05:58 PM 페이지 23

Continued

2 Press the CURSOR ▲/▼/◀/▶ buttons to select the desired programmed order.

ENGLISH

3	Enter the track number with pressing the NUMERIC buttons on the remote control.
	Example: When the numbers 5, 12 and 34 are programmed.

•For 5 :

•For 12 :

•For 34 :

4

5

Repeat the above steps 2 and 3 until the desired numbers are programmed.

To start program playback, press the PLAY (▶) button, or press the CURSOR ▲/▼/◀/▶ buttons to select the PLAY on the program menu and press the ENTER button.

• Playback will start in the programmed order.

• After all programmed tracks have been played, it enters the stop mode without clearing the programmed tracks. (Program playback is suspended)

■Clearing the programmed tracks [숨To clear one by one ]

•While displaying the program menu, press the CURSOR ▲/ ▼/◀/▶ buttons to select the desired number and press the CLEAR button.

[ To clear all programmed tracks ]

•While displaying the program menu, press the CURSOR ▲/▼/◀/▶ buttons to select the CLEAR and press the ENTER button.

•Then the selected track is cleared.

•Repeat this until the desired tracks are cleared.

•Then the programmed tracks are all cleared.

•Opening the disc tray clears all programmed tracks.

23