Shindaiwa 62640-94313 manual Prior To Assembly, Product Description, Specifications

Prior To Assembly

Using Figure 4 as a guide, familiarize your- self with the Shindaiwa AH2510 articulated hedge trimmer and its various compo- nents. Understanding your machine helps ensure top performance, longer service life, and safer operation.

Before assembling, make sure you have all the components required for a complete unit:

nEngine assembly

nOuter tube/cutter assembly

nKit with this manual and tool kit for routine maintenance.

nCutter blade scabbard

Carefully inspect all components for damage.

WARNING!

Do not make unauthorized modifica- tions or alterations to your articulated hedge trimmer or its components.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation.

Product Description

	Spark	Air Filter
		Assembly
	Plug
				Hedge Trimmer Cutter
Stop Switch		Cutter Assembly			Assembly
		Adjustment Lever
		Outer
		Tube
		Fuel Tank
Throttle	Fuel Tank Guard				Cutter Blade
Trigger	Powerhead Assembly				Scabbard
	Handle		Hand
	Grip		Guard
		Latch Lock			Hedge Trimmer
					Cutter Assembly
Recoil			AH231_07
Starter
		Latch			Cutter Bar and
		Release	Gearcase		Cutter Blades
Figure 4

Specifications

Model Name		AH2510
Engine Model		SF2510E
Engine Type	4-cycle, vertical cylinder, air cooled
Dry Weight		14.0 lbs./6.3 kg
Bore x Stroke	34 x 27 mm/1.34 X 1.06”
Displacement		24.5 cc/1.5 cu. in.
Engine Speed at Maximum Power Output.		.........7,500 rpm (min-1)
Maximum Power Output		1.1 hp/0.8 kW
Engine Speed at Idling		3,000 rpm (min-1)
Maximum Engine Speed		10,500 rpm (min-1)
Fuel/Oil Ratio	50:1 with Premium 2-cycle
		air cooled mixing oil
Fuel Tank Capacity		590 ml/20 oz.

Carburetor		Walbro WYL diaphragm type
Ignition System		Fully electronic, program controlled
Spark Plug		NGK CMR5H
Air Filter	Non-reversible, heavy-duty, two -stage filter element
Starting Method		Recoil starter
Stopping Method		Slide switch
Cooling System		Forced air
Transmission Type		Automatic, centrifugal clutch
		with bevel gear
Blade Length		22.3 in/567 mm
Cutter Drive		Spur gear
Gear Lubricant		Lithium based grease

Standard Equipment: Tool kit containing a spark plug wrench,	Optional Equipment: Harness and bracket
4 mm hex wrench, and 8 x 10 mm spanner

Specifications are subject to change without notice.