Using a Hand-held Edger

Guidelines for Operating the Edger

Before edging, make sure the area is soft enough so the blade does not bog down. If necessary, water the area before edging.

Remove debris and other obstacles that could be thrown by the rotating blade.

Plan your work so the edger blade is always on your right-hand side.

Begin each pass by positioning the unit over the work, and with the engine run- ning at about half-throttle. Slowly lower the blade to the ground while applying full throttle. See Figure 16.

Do not move the edger into the work so fast that the engine or blade bogs down.

CAUTION!

Low-speed edging can lead to prema- ture clutch failure.

Do not pull the unit backward over the ground with the engine running. Doing so will tend to bury the blade.

Regular and frequent use of the edger will make a neater lawn, and a frequently trimmed edge will be easier to maintain.

Figure 16

WARNING!

nWear eye protection, long pants, and boots when operating this machine!

nWhenever you strike a hard object with the blade, always stop the edger and carefully inspect the blade for damage. NEVER OPERATE THE EDGER WITH A DAMAGED BLADE!

Adjusting the Cutting Depth

 

Guide Wheel

 

 

Adjusting knob

 

Guide Wheel

 

 

 

The numbers are for

 

 

reference only; they do

 

Figure 17a

NOT refer to depth in

Figure17

inches

 

10

 

 

The edger’s depth of cut is controlled by a combination of operator height, blade wear, and the positioning of the edger’s guide wheel.

To adjust blade height:

1.Loosen the guide wheel adjusting knob. See Figure 17.

2.Raise or lower the guide wheel to the desired setting. See Figure 17a.

3.Tighten the guide wheel adjusting knob firmly . See Figure 17.

WARNING!

Never adjust the guide wheel while the engine is running.

NOTE

Guide wheel adjustment is also required to compensate for blade wear.

WARNING!

Use only Shindaiwa replace- ment edger blades.

Page 10
Image 10
Shindaiwa 81645 manual Using a Hand-held Edger, Adjusting the Cutting Depth, Guidelines for Operating the Edger

81645 specifications

The Shindaiwa 81645 is a powerful and versatile tool designed for professional landscapers and gardeners who rely on performance and durability. This product excels in providing efficient power and productivity for a variety of landscaping tasks, making it a favored choice among outdoor maintenance professionals.

One of the key features of the Shindaiwa 81645 is its powerful engine. It is equipped with a high-performance 25.4cc 2-stroke engine that delivers robust power and reliability. This engine not only provides the necessary strength for cutting through dense brush and tough weeds but also operates efficiently to minimize fuel consumption. The combination of power and efficiency is essential for those who spend long hours in the field.

Durability is another hallmark of the Shindaiwa 81645. Built with professional-grade materials, this product can withstand the rigors of daily use in demanding environments. The unit's rugged construction, combined with its advanced vibration dampening technology, ensures that operators experience reduced fatigue, allowing for longer work sessions without discomfort.

The Shindaiwa 81645 also features an ergonomic design, making it comfortable to handle. The adjustable harness allows customization for a secure fit, distributing the weight evenly across the operator's body. This attention to user comfort promotes better handling and control of the tool, leading to improved efficiency and results.

One of the standout technologies integrated into the Shindaiwa 81645 is its Easy Start system, which significantly reduces the effort needed to start the engine. This feature is particularly beneficial in cold weather or when the equipment has not been used for an extended period. Additionally, the tool includes a heavy-duty cutting head that is designed to handle various mowing applications, from trimming grass to tackling thicker underbrush.

Furthermore, the Shindaiwa 81645 boasts a low emissions design, in line with eco-friendly standards. This makes it an environmentally conscious option for professionals who are mindful of their carbon footprint while still demanding high performance from their equipment.

In summary, the Shindaiwa 81645 is a robust tool that merges power, durability, and user-friendly features. With its powerful engine, ergonomic design, and advanced technologies, it stands as a premier choice for landscaping professionals seeking efficiency and reliability in their day-to-day operations. Whether trimming grass or clearing brush, the Shindaiwa 81645 delivers the performance needed to tackle any outdoor challenge.