Chapter 3

Printing

3.6.5Fine Adjustment

Note:

The settings made in this section can be saved in the file as the printing preferences for a particular print job. See Section 3.3.4 for more detail.

Notes:

∙SeeAppendix 5 for further information.

∙For back feed and cut/strip fine adjustments, the Cutter Module must be installed and enabled.

In Fine Adjustment, the following can be adjusted.

First mark the Set checkbox, and the items which can be adjusted will appear. Depending on the Issue Settings, some of the items cannot be adjusted. (They are grayed out.)

∙In Feed, the print start position can be adjusted.

∙In Backfeed, the length of label stock that is fed back before printing, can be specified. Depending on the type or size of media, the print start position of ONLY the FIRST label or tag may be different from what is defined in the Feed fine adjustment. If there is a difference that is not permissible, adjust the back feed distance. This adjustment does not have any impact upon the print start position after the first label or tag.

∙In Cut/Strip, the cut position can be adjusted.

∙In Stop Position, the stop position of the media after printing can be adjusted. This allows the media to stop at the position, so it can be cut off easily.

57

Page 64 Page 66
Page 65
Image 65
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Fine Adjustment
Page 64 Page 66

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents