Chapter 3

Printing

3.7Options

3.7.1Transfer Mode

Notes:

∙This setting may need to be changed depending on the computer configuration.

∙The setting made in this section can be saved in the file as a preferred setting for a particular print job.

See Section 3.3.4 for more detail.

3.7.2Print Density Adjustment

Notes:

The setting made in this section can be saved in the file as a preferred setting for a particular print job.

See Section 3.3.4 for more detail.

This section describes how to specify the transfer mode of graphics data and make a print density adjustment.

Click the Options tab to open the Options property page.

The type of transfer mode for graphics to the printer is specified here. Run Length Encoding is the recommended transfer mode due to its high transfer rate. When using Uncompressed 8-bit (Overwrite), or Uncompressed 4-bit (Overwrite), the same output as Run Length Encoding can be obtained, but the data transfer speed slows down.

Print density needs to be adjusted to avoid blurred or light print caused by a combination of the media with the ribbon.

Mark the Set Checkbox, and the print density for each color can be adjusted.

The print density value can be adjusted by entering a value or by clicking up or down arrows.

58

Page 65 Page 67
Page 66
Image 66
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Options, Transfer Mode, Print Density Adjustment
Page 65 Page 67

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents