Chapter 2 Printer Installation

2.5Loading the Media (Cont.)

Note:

Make sure that the leading edge of media is cut straight before inserting the media into the printer, as this may cause a media jam.

RightWrong

14Loosen the two screws. Slide the Media Guides in the direction of the arrows below until they stop (completely open).

Screw

Screw

Media Guides

15Unroll about 1.5 to 2 inches (40 to 50cm) of the media.

16Insert the media into the Media Inlet. Make sure that the media passes under the Media End Sensor, the media sensor and the Media Pressure Plate.

Media End Sensor

Media Sensor

Media Pressure Plate

CAUTION!

Do not over tighten the two screws, as this may cause damage to the Media Guides.

Important!

According to the media is loaded, adjust the position of the media sensor. See Section 2.6 for more detail.

Whenever the type of media is changed, adjust sensitivity of the media sensor. See Section 2.7 for more detail.

17Slide the Media Guides in the direction of the arrows below until both guides come in contact with the media (media should be in center of media path). Hand tighten the two screws.

Media Guide

Screw

Screw

Media Guide

14

Page 22
Image 22
Toshiba CB-426-T3-QQ, EO1-33027E owner manual RightWrong

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.