Appendix 2

DIP Switches

This section gives you additional information regarding ribbon near end detection.

∙The printer detects that the ribbon is about to run out, when 10 + 7m of ribbon is remaining.

∙When the ribbon is about to run out, the ERROR LED flashes. When replacing the ribbon, the printer resumes printing. Then the ERROR LED is turned off. When replacing one ribbon, if there is another ribbon that is about to run out, the ERROR LED remains flashing.

∙Switches in DIP Switch A can be changed to specify how the printer operates when the ribbon is about to run out.

1When detecting that the ribbon is about to run out, the ERROR LED flashes, and the printer stops printing temporarily, as if the PAUSE key were pressed. Press the RESTART key to resume printing.

2When detecting that the ribbon is about to run out, the ERROR LED flashes. However the printer does not stop printing until the ribbon runs out completely or finishes the print job.

∙While the ERROR LED is indicating that one ribbon is about to run out, the printer does not detect that another ribbon is almost running out.

∙When using Ribbon Save Mode, the printer cannot detect that the ribbon is about to run out, unless the ribbon advances over 50mm.

82

Page 89 Page 91
Page 90
Image 90
Toshiba EO1-33027E, CB-426-T3-QQ owner manual A2.3 Ribbon Near End Detection
Page 89 Page 91

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents