Chapter 6

 

 

Troubleshooting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Error Messages

Problems/Causes

 

 

 

 

 

 

 

Solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUTTER ERROR####

The media is jammed at the

 

Remove the jammed media. Then press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cutter.

 

the

RESTART

key. If this does not solve

 

 

 

(Only when the Cutter Module

 

 

the problem, turn off the printer, and call

is installed on the printer)

 

 

an authorized service representative.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 The media runs out.

 

1 Load new media.

Then press the

NO PAPER

####

 

 

 

RESTART

 

key.

 

 

 

 

2 The media is not loaded

 

2 Load the media properly. Then press

 

 

properly.

 

 

the

 

 

 

 

 

key.

 

 

 

 

 

 

RESTART

 

 

 

 

3 The Supply Shaft is rotating in

 

3 Switch to the right Back Tension

 

 

the wrong direction.

 

 

Selector.

 

 

 

 

 

 

 

4 The media is slack.

 

4 Take up any slack in the media.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ribbon is not fed

 

Remove the Ribbon Module, and check

RIBBON ERR.####*

successfully.

 

status of the ribbon. Replace the ribbon,

 

 

 

 

if necessary. If the problem is not solved,

 

 

 

 

turn off the printer, and call an authorized

 

 

 

 

service representative.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The print head is overheated.

 

Turn off the printer, and allow it to cool

EXCESS HEAD TEMP

 

 

down (about 3 minutes). If this does not

 

 

 

 

solve the problem, call an authorized

 

 

 

 

service representative.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Top Cover was opened in

 

Close the Top Cover.

Then press the

COVER OPEN

 

Online Mode.

 

RESTART

key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Feed or printing has been

 

Close the Top Cover.

Then press the

COVER OPEN

####

attempted with the Top Cover

 

RESTART

key.

 

 

 

 

open.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Pinch Roller Unit is not

 

Lock the Pinch Roller Unit properly.

 

released in Online Mode.

 

Then press the

 

 

 

key.

PAPER SET ERROR

 

RESTART

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While feeding or printing, the

 

Lock the Pinch Roller Unit properly.

PAPER ERROR ####

Pinch Roller Unit became

 

Then press the

RESTART

key.

 

 

unlocked.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The power supply unit is

 

Turn off the printer, and allow it to cool

EXCESS P/S

TEMP

overheated.

 

down (about 3 minutes). If this does not

 

 

 

 

solve the problem, call an authorized

 

 

 

 

service representative.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ribbon has run out.

 

Load a new ribbon.

Then press the

NO RIBBON

####*

 

 

RESTART

 

key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is a problem with the

 

Replace the print head. Then press the

 

 

print head.

 

 

 

 

 

key.

 

 

HEAD ERROR

*

 

RESTART

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other Error Messages

Hardware or software problems

 

Turn the printer off and then on. If this

 

 

may have occurred.

 

does not solve the problem, turn off the

 

 

 

 

printer again, and call an authorized

 

 

 

 

service representative.

 

 

70

Page 77 Page 79
Page 78
Image 78
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Switch to the right Back Tension
Page 77 Page 79

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents