Appendix 5

System Mode

A5.3 Self-Diagnostic Test (Cont.)

Note:

Make sure that the Top Cover is closed before starting the print head check.

A5.4 Parameter

Setting

Notes:

When pressing the FEED and RESTART keys at the same time

in the parameter setting, the message returns to “<2>

PARAMETER SET”.

If holding the FEED or RESTART key for 0.5 seconds

or longer in the parameter setting, the key is entered continuously.

A changed parameter becomes enabled by pressing the PAUSE key and is stored in memory until the printer is turned off.

Note:

Use the FEED or RESTART key to select a desired value or option.

Checking If There is any Problem with the Print Head

When the Maintenance Counter/Parameter Settings is printed, the message returns to “<1> DIAG.”. Press the PAUSE key three times.

<1>DIAG. V1.0

The printer is ready to check the print heads to see if there are problems with the print head. Press the PAUSE key to start.

HEAD CHECK

The printer starts checking the print heads. It takes about 25 seconds to complete the print head check.

CHECKING

If there is no problem with the print heads, the print head check is complete.

Press the PAUSE key to return to “<1> DIAG.”.

NORMAL END

If there is a problem with the print heads, the message indicates which print head has the problem.

HEAD ERROR

1

This example indicates that there are problems with Head 1.

The Parameter Setting menu contains the following:

Adjustments for a print start position.

Adjustments for a cut position.

Adjustments for a distance of back feed.

Adjustments for a print stop position.

Adjustments for an X-coordinate.

Adjustments for a print density (HEAD 1, HEAD 2).

Modifies the alignment in X direction (HEAD 1, HEAD 2).

Modifies the alignment in Y direction (HEAD 1, HEAD 2).

Initiates printouts of X/Y direction fine adjustment (Caliper-shaped pattern).

Selection of the character code, “0” font and Control code.

Adjustments for a pulse motor speed.

Selection of the print head to be used (HEAD 1, HEAD 2).

Selection of the ribbon type (HEAD 1, HEAD 2).

Selection of the Euro code.

<1>DIAG. V1.0

While pressing the FEED and PAUSE keys at the same time, turn on the printer. Hold both keys until the “<1> DIAG.” message appears. Press the FEED key.

<2>PARAMETER SET

The printer is at the start of the Parameter Setting menu.

92

Page 100
Image 100
Toshiba CB-426-T3-QQ, EO1-33027E owner manual A5.4 Parameter Setting, Head Check, Checking, Normal END, Head Error

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.