Appendix 5

System Mode

Specifying the Control Code Selection Method

CODE AUTO

Note:

See A5.7.4 for further information about the pulse motor speed.

Select the Control Code methods: “AUTO” (automatic selection), or “ESC, LF, NUL” or “{, ,}” or (manual selections).

After selecting the method, press the PAUSE key.

PULSE MOTOR AUTO

Select one of the following pulse motor speeds: AUTO or 104. If selecting “AUTO”, the pulse motor cycle varies depending on the operating temperature. If “104” is selected, the pulse motor cycle is fixed at 104%.

After selecting the pulse motor speed, press the PAUSE key.

Specifying the Euro Code

EURO CODE

B0

Select one of the following Euro codes: FFH, FEH to B0H, B0H to 21H or 20H.

After selecting the Euro code, press the PAUSE key. The message returns to “PRINTER PARA”.

Adjusting the Pulse Motor Speed

PRINTER PARA

After “PRINTER PARA” appears, press the FEED key.

PM ADJUST

Note:

Use the FEED or RESTART key to select a desired value.

To make a fine adjustment of the pulse motor speed, press the PAUSE key.

PM ADJ.

+0

The acceptable values are -60 to +60. As the value becomes lower, the motor speed becomes faster.

After adjusting the pulse motor speed, press the PAUSE key. The message returns to “<2> PARAMETER SET”.

99

Page 106 Page 108
Page 107
Image 107
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Code Auto, Pulse Motor Auto, Euro Code, PM Adjust, Pm Adj
Page 106 Page 108

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents