Chapter 3

Printing

3. Printing

Note:

In this chapter, unless otherwise specified, “click” means click the left mouse button once.

3.1Installing the Printer Driver

3.1.1System Requirements

This chapter explains how to print an image or bar code using the Windows driver. First, it describes in detail how to install the printer driver. Then it describes how to modify the printer settings and fine adjustments to produce the best output. Finally it describes how to print a label.

The chapter is organized as follows:

1To install the printer driver, see Section 3.1.

2To specify the printer properties, see Sections 3.2 to 3.8.

3To perform test printing, see Section 3.9.

4To print an actual label from an application program, see Section 3.10.

To use the CB-426-T3 printer with Windows, the printer driver must be installed on the computer. Labels or tags can easily be printed from a variety of application software using the CB-426-T3 printer driver.

You need an IBM PC/AT-compatible computer with:

Microsoft® Windows® 95/98, Windows NT® Version 4.0 Workstation, or Windows NT® Version 4.0 Server.

Pentium® 133MHz or greater recommended

16MB of available RAM or more (32MB recommended). 10MB or more of available hard-disk space.

3.1.2Installation Procedure

(For Windows®98)

Notes:

For further information about the installation procedure for Windows® NT, please contact your authorized service representative.

The printer driver may be upgraded without notification. For further information about the download of the upgraded printer driver, please access the following URL.

http://barcode.toshibatec.co.jp.

This section has step-by-step procedures to install the TEC Printer Driver Version 6.4 build 33 for Windows® 98.

Preparation

Make preparations for the installation of the printer driver as follows:

1Insert Disk 1 in the floppy disk drive.

2Click the Start button. Then click Run.

3Type “a:setup” in Open, and then click OK.

29

Page 37
Image 37
Toshiba CB-426-T3-QQ, EO1-33027E Printing, System Requirements, Installation Procedure For Windows98, Preparation

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.