Chapter 5

Maintenance

5. Maintenance

This chapter describes how to perform normal maintenance.

To maintain the printer performance and quality print, please clean the printer regularly, or whenever media or ribbons are replaced.

CAUTION!

Be sure to disconnect the power cord before performing maintenance, as this may cause an electric shock.

The print heads may become hot. Do not touch the print head.

Do not pour water directly onto the printer.

5.1Cleaning

5.1.1Print Head/Platen

CAUTION!

Do not allow any hard objects to contact the print head or platen, as this may cause damage to them.

Do not use any volatile solvent including thinner and benzene, as this may cause discoloration of the cover, print failure, or breakdown of the printer.

Do not touch the print head element with bare hands, as static may damage the print head.

Note:

When reinstalling the Guide Plate, place the end of the Guide Plate on the Platen Shaft, and slide it into the end. Then fit the front of the Guide Plate into the Platen Shaft.

The following sections describe periodic cleaning of the unit.

1Turn off the printer. Open the Top Cover.

2Turn the Head Lever to the OPEN position. Remove the Ribbon Module from the printer.

3Lift the print head block.

4Clean the print head element using the supplied Thermal Head Cleaner.

Print Head Block

Print

Head

Element

Thermal Head Cleaner

5Lift the near side of the Guide Plate. Pull and remove it from the Platen.

6Wipe the Platen with a soft cloth moistened with ethyl alcohol.

Platen

Shaft

Guide Plate

Platen

Platen

66

Page 74
Image 74
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Maintenance, Cleaning, Print Head/Platen

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.