Appendix 5

System Mode

A5.6 RAM Clear

Notes:

When pressing the FEED and RESTART keys at the same time in RAM Clear or “NO RAM CLEAR”, the message returns to “<4> RAM CLEAR”.

After RAM clear, the following items are still stored: X/Y direction fine adjustment value, total label distance covered, sensor adjustment value and data in the flash memory.

The RAM Clear menu contains the following:

Maintenance Counter clear.

Parameter clear.

Print Step clear.

<1>DIAG. V1.0

While pressing the FEED and PAUSE keys at the same time, turn on the printer. Hold both keys until the “<1> DIAG.” message appears. Then press the FEED key three times.

<4>RAM CLEAR

RAM clear functions are ready to be performed. Press the PAUSE key.

NO RAM CLEAR

Note:

See A5.7.7 for further information about the initial values after clearing the Maintenance Counter.

Press the PAUSE key not to perform a RAM clear. The message returns to “<4> RAM CLEAR”.

Press the PAUSE key. “NO RAM CLEAR” appears again. Press the FEED key.

Clearing the Maintenance Counter

MAINTE CNT CLEAR

The Maintenance Counter can be cleared by pressing the PAUSE key.

COMPLETE

The Maintenance Counter is cleared.

The printer must be turned off to exit this mode.

Note:

See A5.7.8 for further information about the initial values after clearing the parameters.

Clearing the Parameter

NO RAM CLEAR

When “<4> RAM CLEAR” is shown, press the PAUSE key. “NO RAM CLEAR” appears again. Press the FEED key twice.

PARAMETER CLEAR

The parameters can be cleared by pressing the PAUSE key.

COMPLETE

The parameters are cleared.

The printer must be turned off to exit this mode.

104

Page 112
Image 112
Toshiba CB-426-T3-QQ, EO1-33027E owner manual A5.6 RAM Clear, No RAM Clear, Mainte CNT Clear, Complete, Parameter Clear

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.