Chapter 2 Printer Installation

This section describes in detail how to adjust the media sensor positions and their sensitivity.

Whenever the type of media is changed, a positional adjustment of the media sensor is needed. The media sensors are designed to keep positional alignment of the image on each label or tag when issued.

Important!

NEVER skip the media sensor positional adjustment.

2.6.1Black Mark Sensor

Note:

“1” marked on the sensor indicates the Black Mark Sensor position.

The printer has two types of media sensors: Black Mark Sensor and Feed Gap Sensor.

The Black Mark Sensor (reflective sensor) is used to detect black marks on the back of the media by the reflection of light. On the other hand, the Feed Gap Sensor (transmissive sensor) is used to detect gaps by the transmission of light.

Which media sensor to adjust depends on the type of media loaded.

When the media with black marks on the BACK is loaded, adjust the Black Mark Sensor (reflective sensor) position as follows:

1Open the Top Cover.

2Lift the Pinch Roller Lever to the ROLLER RELEASE position to open the Pinch Roller Unit.

3Align the Media Guides to the width of the media.

4Fold the media so that a black mark faces upward.

5Insert the media into the Media Inlet.

6Turn the Media Guide Knob, and move the media sensor so that it is positioned at the center of the black mark.

 

Media Sensor

Black Mark detected here

 

 

Sensor

 

 

Media

 

Media Guide Knob

Black Mark

Note:

7 The Black Mark Sensor Position Adjustment has been completed.

See A1.3.3 for black mark specifications.

17

Page 25
Image 25
Toshiba CB-426-T3-QQ, EO1-33027E owner manual Sensor Adjustments, Black Mark Sensor

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.