Toshiba CB-426-T3, EO1-33027E Color 0 Yellow Sample, Y5 in Vertical Y on Align Color Yellow/Black

Chapter 3 Printing

3.4.4Color Registration (Cont.)

Note:

The “ Error Writing to LPT1” message appears when performing Align All Colors without connecting the printer to the computer.

4Print testing runs automatically. The printed output shows how precisely the yellow bars are aligned to black.

Yellow Black

	Y1	Y2	Y3	Y4	Y5	Y6	Y7	Y8	Y9
Black
Yellow	X1	X2	X3	X4	X5	X6	X7	X8	X9

(Color 0 - Yellow Sample)

5Look at the result carefully. Determine which yellow bar is best aligned to black on X (horizontal) and Y (vertical) for each. In this example, X5 and Y5 are best aligned.

6In step 5, since X5 and Y5 are best aligned, click X5 in Horizontal

(X), and Y5 in Vertical (Y) on Align Color : Yellow/Black.

∙If the yellow bars in both X and Y are aligned enough to black, go to Step 7.

∙If the yellow bars need to have more precise alignment to black, go to Step 8.

∙If the test needs to be performed again, go to Step 9.

7Click Color is now aligned as closely as possible. Then click OK.

8Click More precise adjustment is necessary. Click OK, and test printing starts automatically. Repeat Step 3 to 5 until the yellow bars in X and Y are aligned close enough to black.

Note:

If precise adjustment cannot be made any more, this option will be grayed

Yellow

out.

Black

Y1

Black

Yellow

X1

Y2 Y3 Y4 Y5 Y6 Y7 Y8

X2 X3 X4 X5 X6 X7 X8

(Color 0 - Yellow Sample after Calibration)

Y9

X9

9Click Print this set of figures again. Testing will start automatically.

51