Chapter 2 Printer Installation

2.7Loading the Ribbons

(for Hot Release

Ribbons)

Note:

Media Width does not include width of the backing paper.

2.7.1Ribbon Positions

Important!:

When loading the ribbons, please do not forget to specify the ribbon colors in the printer properties. See Section 3.4.3 for more detail.

2.7.2Loading Procedure

Notes:

∙Turn the Head Lever to the OPEN position completely, or the Ribbon Module cannot be removed.

∙Do not bend, drop, or give any shock to the Ribbon Module. Distortion of the Ribbon Module may cause poor print.

This section describes in detail how to load the ribbons in the printer. Please use the ribbon width corresponding to the media width from the table shown below.

Ribbon Width

Media Width

 

 

2.7 (68)

2 to 2.6 (50 to 65)

3.5 (88)

2.6 to 3.4 (65 to 85)

4.3 (109)

3.4 to 4.4 (85 to 110)

Dimensions in inches + (mm)

There are two types of ribbons: high-performance Hot Release Ribbons that provide fast, quality print, and the popular Cold Release Ribbons. This section focuses on how to load the Hot Release Ribbons.

See Section 2.8 for loading procedures of the Cold Release Ribbons. Also refer to the table in Section 3.8.2 for specific information about each ribbon type. If the ribbon type to be used cannot be found in the table, contact an authorized sales representative.

Please load the ribbons, as illustrated below.

Head 2 (Front)

Head 1 (Back)

1Open the Top Cover.

2Turn the Head Lever to the OPEN position. Pull out each Ribbon Module in the direction of the arrow, and remove it from the printer.

Head Lever

LOCK HEAD

OPEN

Ribbon Module

3Remove the two Ribbon Shafts from the Ribbon Module. Remove the Ribbon Stopper from each Ribbon Shaft.

Ribbon Shaft

Ribbon Stoppers

21

Page 28 Page 30
Page 29
Image 29
Toshiba CB-426-T3 Loading the Ribbons For Hot Release, Ribbon Positions, Loading Procedure, Ribbon Width Media Width
Page 28 Page 30

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.
Top Page Image Contents