Chapter 2

Printer Installation

2.7.2

Loading

4 Insert the Ribbon Shaft into the Ribbon Winding Core. Fit the

 

Procedure (Cont.)

protrusion of the Ribbon Shaft into the notch of the Ribbon

 

 

Winding Core. Insert the other Ribbon Shaft into the Ribbon Feed

 

 

Core in the same manner.

 

 

 

Ribbon Winding Core

 

 

Protrusion

Ribbon Feed Core

 

 

 

 

 

Notch

 

Ribbon Shaft

CAUTION!

Push in the Ribbon Stoppers gently. Otherwise, damage may occur.

Note:

Please make sure that the Ribbon Stoppers are completely inserted into the Ribbon Winding Core and Ribbon Feed Core respectively.

5Attach the Ribbon Stoppers gently to each Ribbon Shaft.

Ribbon Feed Core

Ribbon Shaft

Ribbon Winding Core

Ribbon Shaft

Ribbon Stoppers

6Unroll about 1 inch (30cm) of the ribbon. Place the Ribbon Module

on the ribbon.

Ribbon Module

Ribbon Feed Core

Ribbon Winding Core

Ribbon

 

7Insert the Ribbon Feed Core, and then the Ribbon Winding Core on the Ribbon Module, as illustrated below.

Ribbon Feed Core

CAUTION!

Loading the ribbon upside down may cause damage to the print head, as well as print failure.

Ribbon Winding Core

22

Page 30
Image 30
Toshiba EO1-33027E, CB-426-T3-QQ owner manual Loading, Procedure

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.