Chapter 2 Printer Installation

2. Printer Installation

2.1Installing the Accessories

2.1.1Fan Filters

Note:

Please clean the Filter Pads periodically. See Section 5.1.3.

This chapter describes in detail how to set up the printer to get ready for printing.

First install the accessories on the printer.

1Unpack the Fan Filters.

2Mount the Fan Filters over the Air Vents.

Filter Pad

Filter Retainer

Air Vents

(Cooling Fans)

2.1.2Media Slide

Notes:

Either a roll of labels or tags can be loaded in the printer.

In this Owner's Manual, labels and tags are generically called "media".

TOSHIBA TEC recommends that labels are rolled outside, and the tags are rolled inside. The media loading procedure depends on which type of media is going to be loaded. See Section 2.5 for more detail.

Attach the Media Slide with the two supplied black screws.

When loading a roll of labels, fit the Media Slide on the screw holes above the Media Inlet.

or

When loading a roll of tags, fit the Media Slide on the screw holes below the Media Inlet.

Media Slide (for labels)

Media Slide (for tags)

2.1.3

Supply Shaft Holder

1

Connect the Supply Shaft Holder Harness to the harness attached

 

 

 

on the rear of the printer.

 

 

2

First hook the lower parts of the Supply Shaft Holder into the

 

 

 

lower two Supply Shaft Holder Slots on the rear of the printer.

 

 

 

Then fix the Supply Shaft Holder in place by tightening the screw.

To remove the Supply Shaft Holder from the printer, just reverse the installation procedure.

Supply Shaft

Screw

Holder Slots

 

 

Harness

Supply Shaft Holder

Supply Shaft Holder Harness

6

Page 14
Image 14
Toshiba CB-426-T3 Printer Installation, Installing the Accessories, Fan Filters, Media Slide, Supply Shaft Holder

EO1-33027E, CB-426-T3-QQ, CB-426-T3 specifications

The Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E are notable entries in the realm of consumer electronics, specifically in the domain of high-performance batteries and power solutions. Toshiba has a longstanding reputation for innovation and reliability in the electronics industry, and these models are a testament to that legacy.

One of the main features of the Toshiba CB-426-T3 is its advanced lithium-ion technology. This significant enhancement allows for a higher energy density, which means that users can experience longer battery life without a corresponding increase in weight or size. The CB-426-T3 is especially suitable for devices that require high performance over extended periods, making it ideal for laptops, power tools, and other portable devices.

The CB-426-T3-QQ variant enhances the capabilities of the original model with improved thermal management features. With a robust design that efficiently dissipates heat, this model is especially beneficial in applications where overheating could compromise performance. This makes it an excellent choice for gamers or professionals who push their devices to the limit, providing peace of mind that the battery will sustain high performance levels even under demanding conditions.

In addition to their robust design and energy density improvements, both the CB-426-T3 and the CB-426-T3-QQ models come equipped with advanced safety features. These include overcharge protection, short-circuit prevention, and built-in thermal fuses. Such safety measures are vital in prolonging battery life and ensuring that the devices powered by these batteries remain safe under various operating conditions.

The EO1-33027E is positioned as a versatile power solution that integrates seamlessly with various Toshiba devices. This model leverages cutting-edge battery management technologies that monitor charge cycles, optimize performance, and extend battery lifespan. The EO1-33027E can be used in a wide range of applications, making it suitable for both consumer electronics and larger industrial equipment.

In conclusion, the Toshiba CB-426-T3, CB-426-T3-QQ, and EO1-33027E stand out for their advanced technologies and features. Their emphasis on energy efficiency, safety, and versatility makes them excellent choices for users who demand reliability and performance from their battery solutions. With these models, Toshiba continues to solidify its position as a leader in the electric power market, catering to the needs of modern consumers and industries alike.