Specifications
Top Shelf Weight Capacity | 250 lb. |
Drawer Weight Capacity | 25 lb. (per drawer) |
|
|
Bottom Shelf Capacity | 200 lb. |
Vise Capacity | 7" |
Table Top Thickness |
Setup - Before Use:
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 10.
Note: More than one person is needed for proper assembly.
Note: In the supplied bag of hardware, the Nuts are already threaded onto the Screw (6).
| Connecting |
| Nuts (8) |
1. Insert Connecting Nuts (8) into holes at end of Cross Braces (3). | Leg (4) |
Make sure that the slot on the Nuts align horizontally with the | |
Bolts (7). This will allow the Bolts to be threaded into the Cross |
|
Braces. See Figure A, right. |
|
Safety
Setup
2.Set the Cross Brace against a Leg (4) and use the Hex Wrench
(9) and Bolt (7) to fasten Cross Brace and Leg together.
See Figure B, right.
Cross Brace (3)
Figure A
Cross
Brace (3)
Hex
Wrench (9)
Operation
| Leg (4) |
NOTE: Make sure the groove in the Cross Brace is facing IN. | Figure B |
| |
See Figures A and B. |
|
Maintenance
Item 69054 | For technical questions, please call | Page 3 |
