Shindaiwa LE254, X7502825800 Assembly continued, Mixing Fuel, Adjust Throttle Trigger Free Play

Models: LE254 X7502825800

1 28
Download 28 pages 57.88 Kb
Page 7
Image 7
Assembly (continued)

Assembly (continued)

Adjust Throttle Trigger Free Play

The throttle trigger free play should be approximately 4 - 6 mm (3/16” - 1/4”). Make sure that the throttle lever oper- ates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illustrations that follow.

1.

Loosen the air cleaner cover knob

4-6 mm

(3/16”-1/4”)

 

and remove the air cleaner cover.

Throttle Trigger

2.

Turn the cable adjuster in or out as

Free Play

 

required to obtain proper free play

 

 

 

 

 

 

4-6 mm.

 

3.

Reinstall the air cleaner cover.

 

Remove air cleaner cover

Cable

Adjuster Adjust as required for 4-6 mm free play

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa require- ments are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carbure- tors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems

due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certi- fied oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

7

Page 7
Image 7
Shindaiwa LE254, X7502825800 manual Assembly continued, Mixing Fuel, Adjust Throttle Trigger Free Play, Fuel Requirements